668301
9
Zoom out
Zoom in
Previous page
1/61
Next page
PKZ 180 B2
6 
GB
IE
NI
Operation
NOTE
The appliance vibrates during operation.
Therefore, always put it down during opera-
tion. There are four feet
on the bottom of
the appliance for this purpose.
Remove the required accessories from the ac-
cessory compartment
.
Switching on and off
Switching the appliance on:
Move the ON/OFF switch into the position
"I" to switch the appliance on. The integrated
control lamp lights up.
Switching the appliance off:
Move the ON/OFF switch
into the position
"O" to switch the appliance off. The integrated
control lamp goes out.
CAUTION!
Caution! This appliance is not designed for
continuous operation. To prevent the motor
from overheating, the appliance may only be
used as follows: within a period of 10 min-
utes the appliance may only be operated at
the rated power input for 15% of the period,
in other words, 1.5 minutes. During the rest of
the time period (cooling phase 8.5 minutes),
the appliance cools down again.
Compressed air hose with quick coupler
Connecting:
Push the compressed air connector into the
quick coupler of the compressed air hose ,
the sleeve automatically springs forwards.
Cutting:
Pull back the sleeve on the quick coupler of
the compressed air hose
and remove the
compressed air connector .
CAUTION!
Caution! When disconnecting the quick
coupler of the compressed air hose
, hold
the coupler firmly to prevent injuries caused
by the hose flying off.
Inflation
with adapter
Schrader valve
Area of use:
This application allows for a simple and accurate
inflation. The manometer
is used to check the
tire pressure. Thanks to the integrated release valve
it is possible to reduce the tire pressure if it is
too high.
ATTENTION!
Please note, the manometer
is not cali-
brated! After inflation, always check the tire
pressure immediately, for example, at a petrol
station.
Ensure that the ON/OFF switch
is set to "O".
Press the lever quick coupler
downwards to
attach it.
Place the lever quick coupler
onto the valve
and then release the lever.
Insert the mains plug
of the compressor into
a mains power socket.
Switch the ON/OFF switch
to "I". The inte-
grated control lamp lights up.
Pull the trigger
.
Read the air pressure from the manometer
.
Let the trigger
off again.
Switch the ON/OFF switch
to "O" as soon
as the correct or permissible air pressure has
been reached. The integrated control lamp
goes out.
Press down the lever quick coupler
and pull
it off the valve.
Remove the mains plug
from the mains
power socket.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKZ 180 B2 - IAN 280329 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKZ 180 B2 - IAN 280329 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info