763017
35
Zoom out
Zoom in
Previous page
1/40
Next page
PKZ 180 B2
32 GB
using the adapter nozzle
Area of use:
You can insert the adapter nozzle in a vent
valve. You will find this together with other valves
(standard valve, screw valve, ...) on large-volume
items, for example an inflatable mattress.
Press the lever quick coupler downwards to
attach it.
Insert the nozzle adapter into the lever quick
coupler and then release it.
Screw the nozzle adapter into the adapter
nozzle .
Inflate as described above.
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before commencing any
work to the appliance.
Do not use any sharp objects to clean the
appliance. Never permit fluids to penetrate
inside the appliance. The appliance could be
damaged.
The appliance is maintenance-free.
Ensure that the appliance has cooled down
completely, otherwise there is a risk of burns.
The appliance must be depressurised before
all cleaning and maintenance tasks. To do this,
open the release valve until no more air
escapes.
Clean the appliance regularly, preferably im-
mediately after completion of the work.
Clean the housing with a dry cloth – do NOT
use petrol, solvents or cleaners that can attack
the plastic.
Ensure that no water gets into the appliance.
Ventilation openings must never be obstructed.
NOTE
Replacement parts not listed (such as adapter
nozzles, switch) can be ordered via our
service hotline.
NOTE
This appliance is maintenance free. Never open
the appliance. The appliance may only be re-
paired by an authorised service centre or Cus-
tomer Service. If one of the faults listed below
occurs, note the following:
Disconnect the appliance from any power
supply.
Allow the appliance to cool down and wait a
short while for the residual energy to neutralise.
Ensure that the appliance is in good working
condition.
Troubleshooting
Fault Solution
1. Appliance
does not
run
1. Check your power supply.
Check that all cables, fuses
and the mains socket are in
working order.
2. Do not use excessively long
extension cables.
3. Do not use the appliance
at temperatures below
+5 degrees.
4. Avoid overheating the
motor. Allow the motor
to cool down.
2. Working
pressure
too low
Check the seals and the non-
return valve. Replace these if
necessary.
3. Tools do
not work
Check the hoses, quick coupler
and the tools. Replace these if
necessary.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKZ 180 B2 - IAN 280284 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKZ 180 B2 - IAN 280284 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info