668303

Parkside PKZ 180 A1 - IAN 93472 Manual

30
Zoom out
Zoom in
Previous page
1/34
Next page
30 GB
... / Cleaning / Care / Spare ... / Maintenance and ... /Information about ...
General safety information for electrical devices / Before use / Start-up
always use the handle on the device to move
it. Never touch the device itself!
ATTENTION! The compressor housing may
become hot during use. Do not touch hot sur-
faces in order to prevent burns.
Never leave the device in operation unattended.
Built-up heat generated by the device can be a
source of danger. This compressor is equipped
with overheat protection. Of the motor reaches
a temperature of 130 °C, the overheat protec-
tion will automatically shut it off. This allows the
motor to cool off, thus preventing damage. Once
the motor has cooled down, it will automatically
restart. This pause is normal and is intended to
protect the motor. This process will repeat if the
motor again reaches a temperature of 130 °C.
Only use indoors.
WARNING! The compressor can start up
without warning!
Before use
Only use the compressor in dry, well ventilated
rooms. The room must be free from dust, acids,
fumes, explosive or flammable gasses.
Check that all of the device‘s parts are in per-
fect condition.
Make sure that the available mains voltage is
compatible with the voltage intended for oper-
ating the compressor.
Avoid long supply lines.
Place the compressor on its rubber feet before
use.
Note: The switch light indicates the mains connec-
tion and does not indicate pump operation.
Start-up
Switching the compress
on / off (cf. Fig. A)
Please set the on / off switch
4
to position I to
switch on.
Please set the on / off switch
4
to position 0
to switch on.
Establishing connections
(cf. Fig. B)
ATTENTION! Switch off the device for this
purpose. Please hold on to the coupling to
prevent injuries due to the hose rebounding.
Connect the nipple of your air tool to the com-
pressor‘s air hose
3
.
To disconnect this connection, pull back on the
quick-disconnect coupling of the air hose
3
.
Using the tyre filling
device (cf. Fig. C)
The compressed air tyre filling device
9
is used to
inflate car tyres and, used with the appropriate ac-
cessories, also to inflate and control bicycle tyres,
rubber dinghies, air mattresses, balls, etc.
ATTENTION! The pressure gauge
6
is not cali-
brated! Please check the air pressure with a cali-
brated device after filling.
Using the blow-out gun
(cf. Fig. D)
The tyre filling device
9
can also be used to clean
hollow spaces and dirty surfaces and tools when
used as a blow-out gun.
To do so, please first remove the hose with
valve adapter
5
.
Now attach the blow-out adapter
7
with the
tyre filling device
9
.
93472_Kompressor_PKZ_180_A1_Content_DE-AT-NL.indd 30 13.11.13 16:56
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKZ 180 A1 - IAN 93472 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKZ 180 A1 - IAN 93472 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PKZ 180 A1 - IAN 93472

Parkside PKZ 180 A1 - IAN 93472 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info