722811

Parkside PKSA 20-Li A1 - IAN 327523-1904 Manual

41
Zoom out
Zoom in
Previous page
1/193
Next page
PKSA 20-Li A1
GB
│
IE
│
 35 ■
■ The warning and safety signs on the tool pro-
vide important information for safe operation.
■ In addition to the notices in these operating
instructions, all general safety and accident pre-
vention legislation must also be complied with.
■ Keep plastic wrapping away from children.
There is a risk of suffocation!
■ Insufficiently informed operators can be a
danger to other people and themselves due to
improper use. The operator is responsible for
third parties.
■ Be very careful when handling the tool. Use
common sense when working and play close
attention to what you are doing.
■ Do not work for longer than 10 minutes in one
session. We recommend taking a break of
10–20 minutes between working sessions.
■ Lend the tool only to users who have experi-
ence with the tool. Hand over the operating
instructions at the same time.
■ Some cutting tasks require special training and
particular skills. If in doubt, please consult an
expert.
■ First-time users must seek training to familiarise
themselves with the characteristics of the tool.
For your safety, attend a state-approved chain-
saw training course.
■ When not in use, the tool must be secured to
ensure that it is not a risk to anyone else.
Secure against unauthorised access.
■ The user of the tool is responsible for all acci-
dents and risks that cause injury or damage to
other people's property.
■ Children, adolescents and people with reduced
physical, sensory or mental capabilities must
not use the chainsaw. The only exception to this
are young people over the age of 16 who are
being trained by a specialist.
■ Note that improper maintenance, the use of
non-approved spare parts, or the removal or
modification of the safety equipment can lead
to damage to the tool and severe injuries to the
operator.
Precautions against kickback
WARNING! KICKBACK!
► Be aware of the danger of kickback when
working with the tool. There is a risk of personal
injury. You can avoid kickbacks by being care-
ful and using the correct sawing technique.
■ Contact with the tip of the rail can, in some
cases, lead to an unexpected rearwards reac-
tion resulting in the guide rail flying upwards
towards the operator (see fig. A).
Fig. A
■ Kickbacks can occur if the tip of the guide rail
touches an object or if the wood bends and the
saw chain gets caught in the cut.
■ If the saw chain jams in the upper edge of the
guide rail, the chainsaw can kick back violently
towards the operator (see fold-out page, fig. F).
■ If the saw chain jams in the lower edge of the
guide rail, the chainsaw can jerk violently away
from the operator (see fold-out page, fig. G).
■ Be extremely careful when reapplying the chain
of the chainsaw to a cut you have already
started.
■ Do not saw any branches or pieces of wood
that can move their position during sawing or in
which the cut could close during sawing.
■ Any such reaction can lead to you losing control
over the saw and possibly injuring yourself. Do
not rely solely on the chainsaw's built-in safety
devices. As the user of a chainsaw, you can
take a number of measures to avoid accidents
and injury. A kickback is caused by incorrect
use or misuse. It can be avoided by taking
suitable precautions (as given below):
Bild 1
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKSA 20-Li A1 - IAN 327523-1904 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKSA 20-Li A1 - IAN 327523-1904 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info