706358
27
Zoom out
Zoom in
Previous page
1/92
Next page
GB/IE22
Troubleshooting
Fault Possible cause Remedy
Motor does not work. Motor, cable or plug defective, fuses burnt. Arrange for inspection of the machine by a specialist.
Never repair the motor yourself. Danger! Check fuses
and replace as necessary.
The motor starts up slowly
and does not reach
operating speed.
Voltage too low, coils damaged, capacitor burnt. Contact the utility provider to check the voltage. Arrange
for inspection of the motor by a specialist. Arrange for
replacement of the capacitor by a specialist.
Motor makes excessive
noise.
Coils damaged, motor defective. Arrange for inspection of the motor by a specialist.
The motor does not reach
its full power.
Circuits in the network are overloaded (lamps,
other motors, etc.).
Do not use any other equipment or motors on the same
circuit.
Motor overheats easily. Overloading of the motor, insufficient cooling of
the motor.
Avoid overloading the motor while cutting, remove dust
from the motor in order to ensure optimal cooling of the
motor.
Reduced cutting power
when sawing.
Saw blade too small (ground too much). Readjust end stop of the saw unit.
Saw cut is rough or wavy. Saw blade dull, tooth shape not appropriate for
the material thickness.
Resharpen saw blade and/or use suitable saw blade.
Workpiece pulls away
and/or splinters.
Excessive cutting pressure and/or saw blade not
suitable for use.
Insert suitable saw blade.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKS 1500 A2 - IAN 290768 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKS 1500 A2 - IAN 290768 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 5,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info