Manual Parkside PKS 1500 A2 - IAN 290768 (page 21 of 92) (English, German, Dutch, French, Portuguese, Spanish)

706358

Zoom out

Zoom in

1/92

GB/IE16

9 Use protective equipment

– Wear protective goggles.

– Wear a mask when carrying out dust-creating work.

10 Connect the dust extraction device

– If connections for dust extraction and a collecting de-

vice are present, make sure that they are connected

and used properly.

– Operation in enclosed areas is only permitted with a

suitable extraction system.

11 Do not use the cable for purposes for which it is not

intended

– Do not use the cable to pull the plug out of the outlet.

Protect the cable from heat, oil and sharp edges.

12 Secure the workpiece

– Use the clamping devices or a vice to hold the

workpiece in place. In this manner, it is held more

securely than with your hand.

– An additional support is necessary for long work-

pieces (table, trestle, etc.) in order to prevent the

machine from tipping over.

– Always press the workpiece ﬁrmly against the work-

ing plate and stop in order to prevent bouncing and

twisting of the workpiece.

13 Avoid abnormal posture

– Make sure that you have secure footing and always

maintain your balance.

– Avoid awkward hand positions in which a sudden

slip could cause one or both hands to come into

contact with the saw blade.

14 Take care of your tools

– Keep cutting tools sharp and clean in order to be

able to work better and more safely.

– Follow the instructions for lubrication and for tool

replacement.

– Check the connection cable of the electric tool regu-

larly and have it replaced by a recognised specialist

when damaged.

– Check extension cables regularly and replace them

when damaged.

– Keep the handle dry, clean and free of oil and

grease.

15 Pull the plug out of the outlet

– Never remove loose splinters, chips or jammed wood

pieces from the running saw blade.

– During non-use of the electric tool or prior to mainte-

nance and when replacing tools such as saw blades,

bits, milling heads.

16 Do not leave a tool key inserted

– Before switching on, make sure that keys and adjust-

ing tools are removed.

17 Avoid inadvertent starting

– Make sure that the switch is switched oﬀ when plug-

ging the plug into an outlet.

18 Use extension cables for outdoors

– Only use approved and appropriately identiﬁed

extension cables for use outdoors.

– Only use cable reels in the unrolled state.

19 Remain attentive

– Pay attention to what you are doing. Remain sensible

when working. Do not use the electric tool when you

are distracted.

20 Check the electric tool for potential damage

– Protective devices and other parts must be carefully in-

spected to ensure that they are fault-free and function

as intended prior to continued use of the electric tool.

– Check whether the moving parts function faultlessly

and do not jam or whether parts are damaged. All

parts must be correctly mounted and all conditions

must be fulﬁlled to ensure fault-free operation of the

electric tool.

– The moving protective hood may not be ﬁxed in the

open position.

– Damaged protective devices and parts must be

properly repaired or replaced by a recognised

workshop, insofar as nothing diﬀerent is speciﬁed in

the operating manual.

– Damaged switches must be replaced at a customer

service workshop.

– Do not use any faulty or damaged connection cables.

– Do not use any electric tool on which the switch can-

not be switched on and oﬀ.

21 ATTENTION!

– Exercise elevated caution for double mitre cuts.

22 ATTENTION!

– The use of other insertion tools and other accessories

can entail a risk of injury.

23 Have your electric tool repaired by a qualiﬁed electrician

– This electric tool conforms to the applicable safety

regulations. Repairs may only be performed by an

electrician using original spare parts. Otherwise ac-

cidents can occur.

Additional safety instructions

1 Safety precautions

– Warning! Do not use damaged or deformed saw

blades.

– Replace a worn table insert.

– Only use saw blades recommended by the manufac-

turer which conform to EN 847-1.

– Make sure that a suitable saw blade for the material

to be cut is selected.

– Wear suitable personal protective equipment. This

includes:

– Hearing protection to avoid the risk of becoming

hearing impaired,

– Respiratory protection to avoid the risk of inhaling

harmful dust,

– Wear gloves when handling saw blades and

rough materials. Carry saw blades in a container

whenever practical.

– Wear goggles. Sparks generated during work

or splinters, chippings and dust coming from the

device can lead to loss of eyesight.

– Connect a dust collecting device to the electric tool

when sawing wood. The emission of dust is inﬂu-

enced, among other things, by the type of material

to be processed, the signiﬁcance of local separation

(collection or source) and the correct setting of the

hood/guide plates/guides.

– Do not use saw blades made of high-speed alloy

steel (HSS steel).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKS 1500 A2 - IAN 290768 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 5,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PKS 1500 A2 - IAN 290768 Manual

Product: