Manual Parkside PKS 1500 A1 - IAN 93463 (page 8 of 52) (English, German, Dutch, French)

706390

Zoom out

Zoom in

1/52

3GB/IE

is defective, the power can fail when starting the machi-

ne. This could inuence other machines (e.g. blinking

lamps). If the electrical power corresponds to Zmax <

0.27, such disruptions should not occur. (However, if

they do, inform your specialist dealer).

• The specied vibration emission value has been

measured according to a standardised testing

procedure and can be used for comparison of one

electric tool with another;

• The specied vibration emission value can also be

used for an initial assessment of the load.

Warning:

• The vibration emission value can vary from the

specied value during the actual use of the electric

tool, depending on the type and the manner in which

the electric tool is used;

• Try to minimise stress from vibrations as low as

possible. Some examples of means for reducing the

vibration stress are wearing gloves while using the tool

and limiting work time. In the process all parts of the

operating cycle must be taken into account (such as

times in which the electric tool is switched off or time

in which it is switched on, but is not running under a

load).

Proper use

The mitre saw is used for the cutting of wood and pla-

stic, according to the machine size.

Warning! The supplied saw blade is only intended for

the sawing of wood! Do not use this blade for the saw-

ing of plastic!

The saw is not suitable for the cutting of rewood.

The machine may only be used in the intended man-

ner.

Only suitable saw blades may be used for the machi-

ne. The use of any type of cutting wheels is prohibited.

An element of the intended use is also the observan-

ce of the safety instructions, as well as the assembly

instructions and operating information in the operating

manual.

Persons who operate and maintain the machine must

be familiar with the manual and must be informed

about potential dangers.

Any use beyond this is improper. The user/operator,

not the manufacturer, is responsible for damages or

injuries of any type resulting from this.

In addition, the applicable accident prevention regulati-

ons must be strictly observed.

Other general occupational health and safety-related

rules and regulations must be observed.

The liability of the manufacturer and resulting dama-

ges are excluded in the event of modications of the

machine.

Despite use as intended, specic risk factors cannot

be entirely eliminated. Due to the design and layout of

the machine, the following risks remain:

• Contact with the saw blade in the non-covered saw

area.

• Reaching into the running saw blade (cutting injury).

• Kick-back of workpieces and workpiece parts.

• Saw blade breakage.

• Ejection of faulty carbide parts of the saw blade.

• Hearing damage when the necessary hearing pro-

tection is not used.

• Harmful emissions of wood dusts during use in enc-

losed areas.

Please observe that our equipment was not designed

with the intention of use for commercial or industrial

purposes. We assume no guarantee if the equipment

is used in commercial or industrial applications, or for

equivalent work.

Important information

Attention! The following basic safety measures must

be observed when using electric tools for protection

against electric shock, and the risk of injury and re.

Read all these notices before using the electric tool

and keep the safety instructions for later reference.

Safe work

1 Keep the work area orderly

– Disorder in the work area can lead to accidents.

2 Take environmental inuences into account

– Do not expose electric tools to rain.

– Do not use electric tools in a damp or wet envi-

ronment.

– Make sure that the work area is well-illuminated.

– Do not use electric tools where there is a risk of

re or explosion.

3 Protect yourself from electric shock

– Avoid physical contact with earthed parts (e.g.

pipes, radiators, electric ranges, cooling units).

4 Keep other persons away

– Do not allow other persons, especially children,

to touch the electric tool or the cable. Keep them

away from your work area.

– The operating person must be at least 18 years

of age; trainees must be at least 16 years, ho-

wever only under supervision.

5 Securely store unused electric tools

– Unused electric tools should be stored in a dry,

elevated or closed location out of the reach of

children.

6 Do not overload your electric tool

– They work better and more safely in the specied

output range.

7 Use the correct electric tool

– Do not use low-output electric tools for heavy

work.

– Do not use the electric tool for purposes for which

it is not intended. For example, do not use hand-

held circular saws for the cutting of branches or

logs.

– Do not use the electric tool to cut rewood.

8 Wear suitable clothing

– Do not wear wide clothing or jewellery, which can

become entangled in moving parts.

– When working outdoors, anti-slip footwear is

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKS 1500 A1 - IAN 93463 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PKS 1500 A1 - IAN 93463 Manual

Product: