Manual Parkside PKO 270 A5 - IAN 315462 (page 9 of 72) (English, German, Dutch, Danish, French)

773324

Zoom out

Zoom in

1/72

5GB/IE/NI

21. Place of installation

-Set up the compressor on an even surface.

22. Supply hoses at pressures above 7 bar should be

equipped with a safety cable (e.g. a wire rope).

23. Use ﬂexible hoses in order to prevent transmitting unac-

ceptable loads to the pipeline system at the connection

between the compressor system and the pipeline system.

24. It is essential to use separators, traps and drains which

process the liquids produced by the compressor before

the compressor system is put into operation.

Warning! This electric tool generates an electromagnetic ﬁeld

during operation. This ﬁeld can impair active or passive medical

implants under certain conditions. In order to prevent the risk

of serious or deadly injuries, we recommend that persons with

medical implants consult with their physician and the manufac-

turer of the medical implant prior to operating the electric tool.

Additional Safety Instructions

Safety instructions for working with compressed

air and blasting guns

• The compressor pump and lines can become very hot during

operation. Touching these parts will burn you.

• The air which is sucked in by the compressor must be kept

free of impurities that could cause ﬁres or explosions in the

compressor pump.

• When releasing the hose coupling, hold the hose coupling

piece with your hand. This way, you can protect yourself

against injury from the rebounding hose.

• Wear safety goggles when working with the blow-out pistol.

Foreign bodies or blown oﬀ parts can easily cause injuries.

• Do not blow at people with the blow-out pistol and do not

clean clothes while being worn. Risk of injury!

Safety information for paint spraying

• Do not process any paints or solvents with a ﬂash point be-

low 55 °C. There is a risk of explosion!

• Do not heat up paints or solvents. There is a risk of explosion!

• If hazardous liquids are processed, wear protective ﬁlter

units (face guards). Also, adhere to the safety information

provided by the manufacturers of such liquids.

• The details and designations of the Ordinance on Hazard-

ous Substances, which are displayed on the outer packaging

of the processed material, must be observed.

• Additional protective measures are to be undertaken if neces-

sary, particularly the wearing of suitable clothing and masks.

• Do not smoke during the spraying process and/or in the

work area. There is a risk of explosion! Paint vapors are eas-

ily combustible.

• Never set up or operate the equipment in the vicinity of a ﬁre

place, open lights or sparking machines.

• Do not store or eat food and drink in the work area. Paint

vapors are harmful to your health.

• The work area must exceed 30 m3 and suﬃcient ventilation

must be ensured during spraying and drying. Do not spray

against the wind. Always adhere to the regulations of the

local police authority when spraying combustible or hazard-

ous materials.

• Do not process media such as white spirit, butyl alcohol and

methylene chloride with the PVC pressure hose. These media

will destroy the pressure hose.

Operating pressure vessels

• You must keep your pressure vessel in good working order,

operate the vessel correctly, monitor the vessel, carry out

necessary maintenance and repair work immediately and

meet the relevant safety precautions.

• The supervisory authority may enforce essential control

measures in individual cases.

• A pressure vessel is not allowed to be used if it has faults or

deﬁciencies that can endanger workers or third parties.

• Check the pressure vessel for signs of rust and damage each

time before using. Do not use the compressor with a dam-

aged or rusty pressure vessel. If you discover any damage,

then please contact the customer service workshop.

Do not lose these safety instructions.

Residual risk

Observe the speciﬁed maintenance and safety instructions in

the instruction manual.

Always be attentive at work and keep third persons at a safe

distance from your workplace.

Even with proper use of the device, a certain residual risk re-

mains, which can not be excluded. The following potential haz-

ards can be derived from the type and design of the device:

• Unintentional commissioning of the product

• Hearing loss if no suitable hearing protection is worn

• Wear safety glasses to prevent your eyes and face from

dust and dirt particles

• Inhalation of whirled-up dust and dirt particles

6. Technical data

Mains connection ........................................220-240 V~ 50 Hz

Motor rating W ...................................................................1800

Operating mode .......................................................................S1

Compressor speed .....................................................2850 min-1

Pressure vessel capacity (in liters) .............................approx. 24

Operating pressure .............................................approx. 10 bar

Theoretical intake capacity (l/min) ........................ approx. 260

Sound power level LPA ...............................................75.2 DB(A)

Sound power level LWA .............................................. 95.2 dB(A)

Uncertainty KPA/WA ...........................................................2.11 dB

Protection type .......................................................................IP20

Weight of the unit in kg ..............................................approx. 27

Oil (15W 40) l .......................................................approx. 0.25

Max. altitude (above mean sea level) ...........................1000 m

The noise emission values were measured in accordance with

EN ISO 3744:2010.

Wear hearing protection.

The eﬀects of noise can cause a loss of hearing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKO 270 A5 - IAN 315462 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1.88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PKO 270 A5 - IAN 315462

Parkside PKO 270 A5 - IAN 315462 User Manual - English, German - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PKO 270 A5 - IAN 315462 Manual

Product: