595285
36
Zoom out
Zoom in
Previous page
1/44
Next page
31GB
17 Noise
Wear ear muffs when you use the compressor.
18 Replacing the power cable
To prevent hazards, leave the replacement of
damaged power cables strictly to the manufac-
turer or a qualied electrician. There is a risk of
electric shock!
19 Inating tires
Directly after inating tires, check the pressure
with a suitable pressure gauge, for example at
your lling station.
20 Roadworthy compressors for building site operations
Make sure that all lines and ttings are suitable
for the maximum permissible operating pressure
of the compressor.
21 Place of installation
Set up the compressor on an even surface.
ADDITIONAL SAFETY INSTRUCTIONS
Safety instructions for working with compressed
air and blasting guns
The compressor pump and lines can become very
hot during operation. Touching these parts will burn
you.
The air which is sucked in by the compressor must
be kept free of impurities that could cause res or
explosions in the compressor pump.
When releasing the hose coupling, hold the hose
coupling piece with your hand. This way, you can
protect yourself against injury from the rebounding
hose.
Wear safety goggles when working with the blow-
out pistol. Foreign bodies or blown off parts can
easily cause injuries.
Do not blow at people with the blow-out pistol and
do not clean clothes while being worn. Risk of
injury!
Safety information for paint spraying
Do not process any paints or solvents with a flash point
below 55° C. There is a risk of explosion!
Do not heat up paints or solvents. There is a risk of
explosion!
If hazardous liquids are processed, wear protective filter
units (face guards). Also, adhere to the safety information
provided by the manufacturers of such liquids.
The details and designations of the Ordinance on
Hazardous Substances, which are displayed on the
outer packaging of the processed material, must be
observed.
Additional protective measures are to be undertaken if
necessary, particularly the wearing of suitable clothing
and masks.
Do not smoke during the spraying process and/or in
the work area. There is a risk of explosion! Paint vapors
are easily combustible.
Never set up or operate the equipment in the vicinity of
a fire place, open lights or sparking machines.
Do not store or eat food and drink in the work area.
Paint vapors are harmful to your health.
The work area must exceed 30 m3 and sufficient
ventilation must be ensured during spraying and drying.
Do not spray against the wind. Always adhere to the
regulations of the local police authority when spraying
combustible or hazardous materials.
Do not process media such as white spirit, butyl alcohol
and methylene chloride with the PVC pressure hose.
These media will destroy the pressure hose.
Operating pressure vessels
You must keep your pressure vessel in good working
order, operate the vessel correctly, monitor the vessel,
carry out necessary maintenance and repair work im-
mediately and meet the relevant safety precautions.
The supervisory authority may enforce essential con-
trol measures in individual cases.
A pressure vessel is not allowed to be used if it has
faults or deciencies that can endanger workers or
third parties.
Check the pressure vessel for signs of rust and dama-
ge each time before using. Do not use the compressor
with a damaged or rusty pressure vessel. If you dis-
cover any damage, then please contact the customer
service workshop.
Do not lose these safety instructions
6. Technical data
Mains connection 230 V ~ 50 Hz
Motor rating W 1800
Operating mode S1
Compressor speed min
-1
2850
Pressure vessel capacity
(in liters)
24
Operating pressure approx. 8 bar
Theoretical intake capaci-
ty (l/min)
approx. 270
sound power level L
WA
97 dB(A)
uncertainty K
WA
4 dB
Protection type IP20
Weight of the unit in kg 26
Oil (15W 40) l 0,3
Max. altitude (above mean
sea level)
1000 m
The noise emission values were measured in accord-
ance with EN ISO 2151.
Wear hearing protection.
The effects of noise can cause a loss of hearing.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKO 270 A1 - IAN 109808 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKO 270 A1 - IAN 109808 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info