762968
6
Zoom out
Zoom in
Previous page
1/40
Next page
6
IE NI
3. Hold rmly onto the disc brush (6) and
turn the lock (7) to release .
4. Remove the lock (7).
Mounting the disc brush
1. Detach the dirt collection container (9).
2. Turn the device over.
3. Place the disc brush (6) into the recep-
tor (8).
4. Insert the lock (7) into the recesses (12)
of the receptor.
5. Hold rmly onto the disc brush (6) and
turn the lock (7) to x it in place .
Mounting the lower bar
1. Place the lower bar (3) into the
fastening on the device housing (5).
The stud on the lower bar (3) must t
into the guide rail (10) on the device
housing.
2. Fasten the lower bar (3) using a screw
and quick release lever (4) on each
side.
Mounting the handlebar
The height of the handlebar can be altered
by selecting one of two holes in the
handlebar.
1. Screw the handlebar (1) using the quick
release levers, screws and washers (2)
to the lower bar (3).
The smooth side of the washer should
point towards the quick-release lever;
the grooved side should point towards
the device.
Inserting the dirt container
1. Take hold of the dirt container (9) by
the handle (11).
2. Place the dirt container (9) into the
device housing (5).
Adjusting the handlebar
Setting the inclination
1. Release the quick release levers (4) on
the lower bar(3).
2. Select one of the two possible positions
on the front end of the guide rail (10).
3. Fasten the lower bar (3) using the quick
release levers (4).
Emptying the dirt
container
1. Grip the dirt container (9) by the
handle (11).
2. Lift it out of the device housing.
3. Empty the dirt container (9).
4. Place the dirt container (9) into the
device housing (5).
Maintenance
Only use original parts.
Always check the device before using it
for obvious defects such as loose, worn or
damaged parts, correct the positioning of
screws or other parts. Replace damaged
parts.
Cleaning
Do not use any cleaning agents or
solvents. Chemical substances may
attack the plastic parts of the de-
vice. Never clean the device under
running water.
Clean the surfaces thoroughly after
each use with a soft brush, paintbrush
or cloth.
Turn the device over and clean the disc
brushes (6) and roller brush.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKM 24 A1 - IAN 354879 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKM 24 A1 - IAN 354879 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PKM 24 A1 - IAN 354879

Parkside PKM 24 A1 - IAN 354879 User Manual - German - 16 pages

Parkside PKM 24 A1 - IAN 354879 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info