706342
26
Zoom out
Zoom in
Previous page
1/89
Next page
26 GB/IE
5. If additional height is necessary, loosen the locking screw
14
and
extend the centre column to desired height. Once reached the
desired height, tighten the locking screw
14
.
6. For a horizontal alignment of the tripod flat head
18
, loosen the
long handle
12
by turning anti-clockwise and move the handle up
or down as desired. If the air bubble of the spirit level
11
is located
exactly in the middle of the circle, the tripod flat head is aligned
horizontally. Then, tighten the long handle
12
by turning it clockwise.
7. If necessary, loosen the locking screw
13
to rotate the tripod flat
head
18
up to 360 degree horizontally to get desired side. Once
reached the desired side, tighten the locking screw
13
.
8. If necessary, loosen the locking screw
10
to adjust the angle of the
tripod flat head
18
up to 90 degree vertically to get desired angle.
Once reached the desired angle, tighten the locking screw
10
.
Securing the Cross Line Laser
Align
-thread
6
of cross line laser with the -screw
8
of
the quick shoe and make sure to tighten the screw well by screwing
the metal key
9
clockwise. The metal key
9
is on the bottom side of
the quick shoe
19
.
Removing quick shoe from tripod:
User can just remove the cross line laser together with quick shoe
19
from tripod by following below steps:
1. Pull the lever
11a
on the tripod flat head
18
along the side.
2. Remove the quick shoe
19
.
3. If want to put back the cross line laser on the tripod again, pull the
lever
11a
on the tripod flat head
18
and place the quick shoe
19
back firmly on the tripod flat head
18
. Then, release the lever
11a
to bring back to original position and to firmly hold the quick shoe
19
(see fig. A).
4. Check the tight fitting of the quick shoe
19
within the tripod flat
head
18
.
Maintenance and cleaning
The product requires no maintenance.
ATTENTION! Never submerge the product in water or other liquid
s.
Do not allow water to enter into the product during cleaning.
Keep the product clean to ensure good, secure work.
Use a dry cloth to clean the outside.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKLL 8 A3 - IAN 322432 - 1901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKLL 8 A3 - IAN 322432 - 1901 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info