651495
13
Zoom out
Zoom in
Previous page
1/74
Next page
GB
IE
10
PKLL 7 A1
Working procedures
Use only the centre of the laser line to make your marking.
The width of the laser line changes with the distance.
Working with the clamp
With the help of the clamp you can attach the measuring tool to
various items, e.g. vertical or horizontal boards or pipes.
Undo the fixing screw
.
Position the clamp
in the desired location and then retighten
the fixing screw .
Now place the appliance with the tripod thread
on the
screw and screw it tight with moderate force. Do not over-
tighten the appliance as it could be damaged.
Align the clamp to roughly the position you require before you
switch on the appliance.
To do this, undo the locking screw
and move the appliance
to a horizontal position at the desired height.
Retighten the locking screw
.
Working with a tripod
A tripod offers a stable, height-adjustable support for taking measure-
ments.
Place the measuring tool with the tripod thread
on the 1/4”
screw of the tripod.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKLL 7 A1 CROSS LINE LASER - IAN 270767 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKLL 7 A1 CROSS LINE LASER - IAN 270767 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info