Manual Parkside PKLL 7 A1 - IAN 282405 (page 28 of 116) (English, German, Dutch, French, Portuguese, Spanish)

706346

Zoom out

Zoom in

1/116

PKLL 7 A1

│

25 ■

Automatic levelling

■ Place the appliance on a ﬁrm horizontal surface to work with auto-

matic levelling or fasten it onto a tripod via the 1/4” thread

■ After switching on, the automatic levelling system automatically

compensates for irregularities within the self-levelling range of

± 4°. Levelling is complete as soon as the laser lines no longer

move and the LED

lights up green.

■ If automatic levelling is not possible, e.g. because the underside

of the measuring tool is oﬀ the horizontal by more than 4° or be-

cause you are holding the appliance in your hand, then the LED

will light up red and the appliance will work without automatic

levelling. The laser lines will remain lit and ﬂash, but the two

crossed lines will not necessarily run at right angles to each other.

NOTE

► When you are working without automatic levelling, this is

always indicated by the red LED

► After vibrations or position changes during operation, the

appliance will always automatically re-level itself. To avoid

errors, always check the position of the horizontal and/or

vertical laser line in relation to reference points after re-

levelling.

Working without automatic levelling

♦ Move the ON/OFF switch into the position.

♦ Press the

button for LED levelling. Immediately after switching

on, the appliance emits two laser lines from the laser aperture

which are not levelled. When you are working without automatic

levelling, this is always indicated by the red LED .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKLL 7 A1 - IAN 282405 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PKLL 7 A1 - IAN 282405 Manual

Product: