796067
25
Zoom out
Zoom in
Previous page
1/105
Next page
PKHAP 20-Li A1 GBIE21
Before use
Charging the battery pack
(seefig.A)
CAUTION!
Always unplug the appliance before you
remove the battery pack from or connect
itto the charger.
Never charge the battery pack when the
ambient temperature is below 10°C or above
40°C.
Connect the battery pack to the high-speed
battery charger0 (see fig. A).
Insert the power plug into the socket. The
control LED6 lights up red to indicate that the
appliance is charging.
The green LED1 indicates that the charging
process is complete and the battery pack is
ready.
Push the battery pack into the appliance.
Attaching/disconnecting the battery
pack to/from the appliance
Attaching the battery pack
Push the rotation direction switch into the
middle position (lock).
Allow the battery pack to click into the
handle.
Removing the battery pack
Press the release button and remove the
battery pack.
Checking the battery charge level
Press the battery charge level button to
check the charge level of the battery.
The status/remaining charge will be shown on
the battery display LED as follows:
RED/ORANGE/GREEN = maximum charge/
performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery
Use
Additional handle
NOTE
For safety reasons, you should never use this
appliance without the additional handle
attached.
Remove the additional handle by turning it in
a clockwise direction (see fold-out page).
Turn the additional handle to the desired
position.
Fix the additional handle in the new position
by turning it anticlockwise.
Depth stop
Push the locking button for the depth stop!
and keep it pushed in.
Insert the depth stop. into the additional
handle.
Ensure that the toothing on the depth stop. is
facing downwards.
Pull the depth stop. out until the distance
between the tip of the drill and the tip of the
depth stop corresponds with the required
drilling depth.
Release the locking button for the depth stop!
to lock the depth stop.
IB_337406_PKHAP20LiA1_LB8.indb 21 10.08.20 15:35
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKHAP 20-Li A1 - IAN 337406 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKHAP 20-Li A1 - IAN 337406 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info