684713
41
Zoom out
Zoom in
Previous page
1/310
Next page
41
IEGB
Trimmer
Cutting diameter,
spool ........................30 cm / 300 mm
String thickness ................. 1.8 - 2.0 mm
String length ................................. 5 m
Speed, spool n .................... 7000 rpm
Max. speed, spool n
max
........13300 rpm
Vibration on handgrip
(a
h
) .............. 3,649 m/s
2
; K= 1,5 m/s
2
Vibration on round handle
(a
h
) ..............4,676 m/s
2
; K= 1,5 m/s
2
Sound pressure level
(L
pA
) ................86,3 dB(A); K
pA
= 3 dB
Sound power level (L
WA
)
measured .. 93,7 dB(A), K
WA
= 2,62 dB
guaranteed ........................96 dB(A)
Brush cutter
Cutting diameter, 3-tooth blade ...25 cm
Speed, blade n .................... 7300 rpm
Max. speed, blade n
max
...... 10000 rpm
Vibration on handgrip
(a
h
) .............. 3,649 m/s
2
; K= 1,5 m/s
2
Vibration on round handle
(a
h
) ..............4,676 m/s
2
; K= 1,5 m/s
2
Sound pressure level
(L
pA
) ................86,3 dB(A); K
pA
= 3 dB
Sound power level (L
WA
)
measured .. 93,7 dB(A), K
WA
= 2,62 dB
guaranteed ........................96 dB(A)
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission value
may differ during actual use of the power
tool from the stated value depending on the
manner in which the power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
(all parts of the operating cycle are to be
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
running idle).
Notes on Safety
This section describes the basic safety
rules when working with the device.
Symbols in the manual
Warning symbols with infor-
mation on damage and injury
prevention.
Instruction symbols with information
on preventing damage.
Wear cut-resistant gloves.
Help symbols with information on
improving tool handling.
Symbols on the Equipment
Caution!
Read through the instruction manual
carefully.
Wear safety goggles!
Wear hearing protection!
Wear a safety helmet!
Wear cut-resistant gloves.
41


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-pkga-40-li-a1---ian-313870

Reset search

  • Bonjour. Je recherche un arbre de transmission de 64 cm de long et de 5 MM de diametre avec les.bout carré sur 2 cm de long pour une perche multifonction tailles haies électriques parkside Submitted on 3-8-2022 at 21:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKGA 40-Li A1 - IAN 313870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKGA 40-Li A1 - IAN 313870 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info