722871
40
Zoom out
Zoom in
Previous page
1/164
Next page
GB IE
40
Attaching sanding sheet
1. Press the sanding sheet (31) evenly
onto the delta sanding plate (30). En-
sure that the holes in the sanding sheet
are placed above the openings in the
sanding plate.
Removing sanding sheet
2. Simply pull the sanding sheet (31) off
the delta sanding plate (30).
Practical tips
When working with the ap-
pliance, always wear suita-
ble clothing and appropriate
protective equipment.
Prior to each use it must be
ensured that the appliance is
working correctly.
Personal protective equip-
ment and a fully functional
appliance reduce the risk of
injuries and accidents.
Wear ear protection.
Sawing
Wear eye protection.
Use only undamaged sawblades in
perfect condition. Only use metal saw-
blades for metalworking.
Ensure your stance is stable and hold
the appliance tightly with both hands
and away from your body.
Before sawing the workpiece, check
for hidden foreign objects such as
nails, screws. These must be removed.
Plunge cuts may only be made in soft
material such as wood or plaster-
board.
Selection of sawblade
Wood sawblade for wood, plastic, plaster-
board
Metal sawblade 
and tubes
Plunge sawblade for soft materials like
wood or plasterboard
Sanding
 -
ing with the multi-sander attachment.
Move the appliance against the work-
piece once it is switched on.
Clean the sanding plate before you at-
tach a sanding sheet.
Only work with sanding sheets in per-
fect condition to achieve good sanding
results.
Work using low and even pressure.
This protects the appliance and the
sanding sheet.
Do not use the same sanding sheet to
sand different materials (e.g. metal
and then wood).
Selection of sanding sheet
Grain size P Application
P 60 for pre-sanding rough wood
surfaces
P 80 / 120 for plain sanding
P 240 
painted surfaces
Scraping
Use a high oscillation rate when scrap-
ing.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKGA 20-Li A1 - IAN 285393 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKGA 20-Li A1 - IAN 285393 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info