Manual Parkside PKGA 14.4 A1 - IAN 110037 (page 11 of 140) (English, German, Dutch, French, Swedish, Finnish)

595312

Zoom out

Zoom in

1/140

charger, cable and plug and

have them repaired by quali-

ed professionals and only with

original parts. Do not use a de-

fective charger and do not open

it up yourself. This ensures that the

safety of the device is maintained.

• Connect the charger only to a

socket with an earth. Ensure

that the mains voltage matches

the specications on the charger

rating plate. Risk of electric shock.

• Disconnect the charger from the

mains before closing or open-

ing connection to the battery /

power tool / device. This ensures

that the battery and charger are not

damaged.

• Keep the charger clean and

away from wet and rain. Do not

use the charger outdoors. Dirt

and the entry of water increase the risk

of electric shock.

• Operate the charger only with

the appropriate original bat-

teries. Charging other batteries may

result in injuries and risk of re.

• Avoid mechanical damage to

the charger. This can result in inter-

nal short circuits.

• Do not operate the charger on a

combustible surface (e.g. paper,

textiles). Risk of re due to heating

during charging.

• If the power cable for this

equipment is damaged, it must

be replaced by the manufac-

turer, a customer service agent

of the same or a similarly quali-

ed person in order to prevent

hazards.

• Do not charge non-rechargeable

batteries in the charger. This could

damage the appliance.

Additional safety instructions

Warning! Sawing or sanding

can result in the formation of

hazardous dusts (e.g. arising

from materials with paints

containing lead, materials

containing asbestos, metals

or some wood types) which

can present a hazard to the

operator or persons in the

vicinity. Make sure that the

workplace is well ventilated.

Always wear safety goggles,

safety gloves and respiratory

protection. Attach a dust ex-

traction system.

1) SPECIAL SAFETY INFORMATION

FOR THE CORDLESS COMBINA-

TION TOOL

• Hold the electric tool by the in-

sulated gripping surfaces when

performing work in which the

cutting tool may come into con-

tact with hidden wiring. Contact

with a live wire can also cause a

charge in metal parts of the appliance

and result in an electric shock.

• Use suitable detectors in order

to nd hidden supply lines or

ask the local utility company.

Contact with electrical cables can lead

to electric shock and re, contact with

a gas pipe can result in an explosion.

Damage to a water pipe can lead to

property damaged and electric shock.

• Secure the workpiece. A work-

piece that is retained with clamping

appliances or a vice is held more se-

curely than with your hand.

• Be very careful when handling

tools such as saws, scraper

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKGA 14.4 A1 - IAN 110037 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 2,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PKGA 14.4 A1 - IAN 110037 Manual

Product: