785729
13
Zoom out
Zoom in
Previous page
1/67
Next page
PKA 20-Li A1 GBIENI 9
Switching on and off
Switching on the appliance (air pump)
Set the ON/OFF switch to the position
.
Switching on the appliance (compressor)
Set the ON/OFF switch to the position .
The appliance starts as soon as you switch on
the display (see section “Display”).
NOTE
The compressor will not work if the display
is switched off.
Switching off the appliance
Set the ON/OFF switch to the position .
Display
Press the ON/OFF button to switch on
the display .
After two seconds, the current pressure of the
connected item is shown.
NOTE
If the compressed air hose is not connected
to a suitable item, the display indicator
shows "0".
You can switch between “bar”, “psi” and “kpa”
on the display by pressing the ON/OFF
button .
NOTE
The display (and also the compressor)
switches off after around three minutes of
inactivity.
The compressor will not work if the display
is switched off.
The compressor switches off automatically
when the preset pressure has been reached.
Press and hold the ON/OFF button for
5 seconds to turn off the display .
Setting the pressure
Press the “+” button or the “−” button to
set the desired pressure.
TIP
When you press and hold the "+" button
or the "-" button for a little longer, the
pressure setting changes quickly.
Use
Inflation with blower hose
Remove the valve cap of the item you want
to inflate.
Remove the blower hose from the storage
compartment .
Fit the connection of the blower hose onto
the air outlet . Screw it in tight by turning it
clockwise.
Fit the appropriate adapter or onto
the blower hose .
Push the adapter or into the valve of
the item.
Switch the appliance on by moving the
ON/OFF switch to the position .
Once the desired level of inflation has been
reached, switch off the appliance by moving
the ON/OFF switch to the position .
Now remove the adapter or .
Replace the valve cap on the item that you
have inflated.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PKA 20-Li A1 - IAN 363935 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PKA 20-Li A1 - IAN 363935 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 3.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info