779301
10
Zoom out
Zoom in
Previous page
1/50
Next page
10
IE NI
4. Clean the collection container (1) with
a damp cloth if required. If required,
clean the fi lter (3) as indicated in the
“Cleaning” section.
5. Place the fi lter holder (2) and fi lter (3)
back into the collection container (1).
Due to its shape, the fi lter holder (2)
can only be inserted into the collection
container (1) in one position.
6. Re-attach the collection container (1)
onto the device. Place it on the under-
side of the device and allow it to latch
into the interlock release on the top
side of the device.
Cleaning
Always remove the recharge-
able battery before carrying
out work on the device.
Risk of injury!
Never spray down the device
with water or place it in wa-
ter! Do not use any abrasive
cleaning agents or solvents.
The device could become
damaged.
Clean the housing with a dry cloth or
paint brush.
Tap the fi lter (3) and clean it with a
brush or compressed air.
If the fi lter is contaminated and cannot
be cleaned, replace it!
See “Spare parts/Accessories”.
Empty the collection container (1) after
every use.
Clean the collection container (1) with
a damp cloth.
Always keep the ventilation slit on the
device housing unobstructed otherwise
the device will overheat.
Maintenance
Replacing the fi lter
If contaminated, replace the fi lter with a
new one.
New fi lters can be acquired from the
online shop. See “Replacement parts/Ac-
cessories.
1. Remove the collection container (1) by
pressing the release button (4) and de-
tachingn the collection container (1).
2. Remove the fi lter (3) from the fi lter
holder (2).
3. Place the new fi lter into the fi lter holder.
Ensure the fi lter is positioned correctly
and securely.
4. Re-attach the collection container (1)
onto the device by placing it on the
underside of the device and allowing it
to latch into the interlock release on the
top side of the device.
Storage
Store the device in a dry place, out of
reach of children.
The ideal storage temperature for the
battery and the device is between 0°C
and 45°C. Avoid extreme cold or heat
during storage to ensure the battery output
is not adversely affected.
Wall bracket
(optional)
You can also mount the cordless hand-held
vacuum cleaner on the wall.
Using dowels, place one screw at the
desired position on a wall.
The screw head can have a diameter
of 6 - 7 mm.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHSSA 20-Li A1 - IAN 339101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHSSA 20-Li A1 - IAN 339101 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 0.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info