Manual Parkside PHS 450 A1 - IAN 355054 (page 26 of 110) (English, German, Dutch, French, Polish)

779493

Zoom out

Zoom in

1/110

GB IE

Wear gloves while handling the

blades. Risk of cuts.

Do not use any cleaning agents or

solvents. These could cause irrepa-

rable damage to the equipment.

Chemical substances can attack the

plastic parts of the equipment.

Carry out the following maintenance and

cleaning work regularly. This will guaran-

tee a long and reliable service life.

• Before each use, check the hedge trim-

mer for obvious defects such as loose,

worn or damaged parts. Check the

secure seating of the bolts in the cutter

bar ( 2).

• Do not use the unit if the blades are

blunt or worn. This will overstress the

motor and gearbox of the machine.

• Check coverings and safety devices

(1+3) for damage and correct seat-

ing. To replace the impact protection

(1) or in case of damage to the

hand guard ( 3), send the device to

our service centre.

• Keep the ventilation slots ( 5) and

motor housing of the device clean. Use

a damp cloth or a brush to do this. Do

not wash down the equipment with wa-

ter, or submerge it in water.

Cleaning and servicing the

blade knife bar

Clean the cutter bar (2) carefully after each

use. After using the equipment, it is impera-

tive to:

- Clean the blade (with an

oily cloth);

- Oil the blade shaft with

an oil can or spray.

Storage

• Clean the equipment before putting it

away.

• Keep the trimmer in the blade protec-

tion ( 10) supplied, in a dry place

and out of reach of children.

Wall bracket

You can hang the motor part on the wall

with the keyhole bore (11) on the bottom

of the device.

• Using dowels, place one screw at the

desired position on a wall.

• The screw head can have a diameter

of 7 - 10 mm.

• Leave the screw head protruding at a

distance of approx. 10 mm from the

wall.

• You can place the device onto the

screw using the opening on the bottom

and pull the device down until it stops.

When drilling, be careful not

to damage any supply lines.

Use suitable search devices

to nd these or consult an in-

stallation plan for guidance.

Contact with electrical cables

can lead to electric shock and

re. Contact with a gas pipe

can result in an explosion.

Damage to a water pipe can

lead to property damage and

electric shock.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHS 450 A1 - IAN 355054 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1.61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHS 450 A1 - IAN 355054 Manual

Product: