Manual Parkside PHS 450 A1 - IAN 355054 (page 22 of 110) (English, German, Dutch, French, Polish)

779493

Zoom out

Zoom in

1/110

GB IE

f) If operating a power tool in a

damp location is unavoidable,

use a residual current device

(RCD) protected supply. Use of an

RCD reduces the risk of electric shock.

3) PERSONAL SAFETY

CAUTION! The following states how

to avoid accidents and injuries:

a) Stay alert, watch what you are

doing and use common sense

when operating a power tool.

Do not use a power tool while

you are tired or under the inu-

ence of drugs, alcohol or medi-

cation. A moment of inattention white

operating power tools may result in

serious personal injury.

b) Use personal protective equip-

ment. Always wear eye protec-

tion. Protective equipment such as dust

mask, non-skid safety shoes, hard hat,

or hearing protection used for appro-

priate conditions will reduce personal

injuries.

c) Prevent unintentional starting.

Ensure the switch is in the off-

position before connecting to

power source and/or battery

pack, picking up or carrying the

tool. Carrying power tools with your

nger on the switch or energising pow-

er tools that have the switch on invites

accidents.

d) Remove any adjusting key or

wrench before turning the pow-

er tool on. A wrench or a key left at-

tached to a rotating part of the power

tool may result in personal injury.

e) Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the power

tool in unexpected situations.

f) Dress properly. Do not wear

loose clothing or jewellery. Keep

your hair and clothing away

from moving parts. Loose clothes,

jewellery or long hair can be caught in

moving parts.

g) If dust extraction and collection

devices can be installed, make

sure that these are connected

and used correctly. Use of dust

collection can reduce dust-related haz-

ards.

h) Do not allow yourself to be

lulled into a false sense of se-

curity and do not disregard the

safety rules for power tools,

even if you are familiar with the

power tool after using it many

times. Careless action can lead to

serious injuries within a fraction of a

second.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use

the correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the

switch does not turn it on and

off. Any power tool that cannot be

controlled with the switch is dangerous

and must be repaired.

c) Remove the plug from the wall

socket and/or remove the re-

chargeable battery before you

change the device’s settings,

change accessory parts or put

away the power tool. Such pre-

ventive safety measures reduce the risk

of starting the power tool accidentaIly.

d) Store idle power tools out of the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHS 450 A1 - IAN 355054 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1.61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHS 450 A1 - IAN 355054 Manual

Product: