674494
9
Zoom out
Zoom in
Previous page
1/34
Next page
9
IE
GB
Overview
1 High pressure connection on the gun side
2 Cap nut
3 Top extension pipe
4 Bottom extension pipe
5 Cap for cleaning agent tank
6 Brush
7 Pull-out lip (replaceable)
8 Cleaning agent dose controller
9 Adapter
10 Cap nut adapter
Safety information
Also observe the safety instruction
for your pressure washer.
Pressure washers can be dan-
gerous if used incorrectly. Do
not direct the jet at people, ani-
mals, live electrical equipment or the
equipment itself.
To prevent damage, please also note
the manufacturer’s instructions for the
object being cleaned.
Use only original accessories and do
not carry out any modications.
Graphical symbols
on the device
Read the operating instructions.
Technical specications
Pressure washer brush attachment:
Suitable for high pressure cleaners with the
following performance data:
Rated pressure (p). .....11 MPa / 1595 psi
Max. pressure (p max) .16 MPa / 2320 psi
Max. ow rate (Q max) .............. 450 l/h
Max. inlet
temperature (T max) ..........
60 °C / 140 °F
Cleaning agent tank lling level ...... 210 ml
Initial Operation
Assembly:
1. Screw the brush (6) onto the bottom
extension pipe (4).
2. Screw the bottom extension pipe (4)
onto the top extension pipe (3).
Connecting without adapter:
1. Plug in and twist (Bayonet locking devi-
ce) to connect the pressure scrubber to
the spray gun of your PARKSIDE pressu-
re washer via the high pressure connec-
tion on the gun side (1).
2. Screw the cap nut (2) against the spray
gun for a rm grip.
Connecting with adapter:
1. Attach the adapter (9) to the high-pre-
ssure connection (1) and turn it through
90° until it locks into place (bayonet
locking device).
2. Screw the cap nut (2) on to the upper
extension tube (3) against the adapter
(9).
3. Connect the spray gun of the high
pressure cleaner (bayonet locking de-
vice) and screw the cap nut (10) of the
adapter (9) against the spray gun.
On all surfaces, test the brush (6)
initially on a location that is not
visible, in order to ensure compati-
bility.
Disconnecting:
Removal of the pressure scrubber is in the
reverse order.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHS 29 A1 - IAN 297588 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHS 29 A1 - IAN 297588 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info