764033
7
Zoom out
Zoom in
Previous page
1/42
Next page
7
IE NI
The device has an automatic
switch-off when the device is not
in use. It switches off automatically
after 30 minutes.
Operating temperature
indicator
After switching on the device, it heats up.
The transparent On/off switch (1) lights up:
On/off switch (1) lit up red
= device heating up
On/off switch (1) lit up green
= operating temperature reached
(approx. 140°C)
The device takes approx. 60 se-
conds to heat up before it reaches
the operating temperature.
Working with the device
Preparing the bonding surfaces
Do not use any ammable
solvents to clean the bonding
surfaces.
Clean the bonding surfaces! They must
be clean, dry and free of grease.
Roughen smooth surfaces before glu-
ing.
Warm quick-cooling materials such as
steel up a bit before gluing. The glue
will stick better.
The ambient temperature and the ma-
terials to be glued must not be colder
than + 5°C or warmer than + 50°C.
Removing/inserting the re-
chargeable battery
1. To remove the rechargeable battery
(4) from the device, press the release
button (5) on the battery and pull the
battery out.
2. To insert the battery (4), push the battery
along the guide rail into the device. You
will hear it click into place.
Switching on and off
Switching the device on::
Hold down the transparent On/off switch
(1) for 3 seconds.
The LED work light (6) now lights up per-
manently.
Switching off the LED work light:
The device is switched on, the LED work
light lights up permanently. To switch off
the LED work light, now press and hold the
transparent On/off switch for several secon-
ds. The LED work light switches off, but the
device continues running.
To only switch off the LED work
light, make sure to press and hold
the On/off switch for several se-
conds. Pressing for too short of a
time switches off the entire device.
Switching the device off:
Press the transparent On/Off switch (1).
Place the cordless hot glue
gun on the inserted batte-
ry until the device is cooled
down completely. The hot
nozzle can cause damage
and/or burns.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHPA 20-Li A1 - IAN 354648 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHPA 20-Li A1 - IAN 354648 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info