595424
34
Zoom out
Zoom in
Previous page
1/40
Next page
31
PHKS 1350 A1
GB
WARNING! Protect yourself from laser
radiation!
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
P max.: < 1 mW
λ: 650 nm
EN 60825-1: 2007
This appliance contains a Class 2 laser.
NEVER direct the laser beam at people or
animals.
NEVER look directly into the laser beam.
The laser beam can cause serious eye damage.
Do NOT direct the laser beam at strongly
refl ective material. Refl ected laser beams are
also dangerous.
Any adjustment intended to increase the
intensity of the laser beam is forbidden.
There is a risk of personal injury!
No liability will be accepted for damage
resulting from manipulation of the laser
equipment or from disregarding these safety
instructions.
Changing the batteries:
Open the cover of the battery compartment
with a suitable Philips screwdriver.
Remove the spent batteries.
Insert two new 1.5 V alkaline button cells (type
AG 13/LR 44, e.g. GPA 76) observing the
correct polarity and screw the battery compart-
ment cover rmly closed.
CAUTION!
If operating and adjustment equipment is used or
procedures other than those specifi ed here are
carried out, this may result in hazardous radiation
exposure.
Original accessories/additional
equipment
Only use the accessories and additional equip-
ment that are specifi ed in the operating instruc-
tions and are compatible with the appliance.
Initial operation
Fitting/changing the saw blade
Always pull out the plug from the mains before
changing the saw blade !
1. Set the cutting depth (using the locking screw
)
to the minimum position, 0 mm.
2. Swing the blade guard
back using the release
lever and put the device down.
3. Press the spindle lock button
(until it engages)
and use the Allen key
to release the clamping
screw/washer . Now remover the clamping
screw/washer and the clamping fl ange
(see also Fig. A).
Fig. A: Changing the saw blade
4. Remove
saw blade.
5. Fitting a saw blade
is carried out in the
reverse order.
6. Press the spindle lock button
(until it engages)
and use the Allen key
to tighten the clamping
screw/washer .
IB_36453_PHKS1350A1_LB_DE_AT_NL.indb 31IB_36453_PHKS1350A1_LB_DE_AT_NL.indb 31 28.04.14 08:3428.04.14 08:34
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHKS 1350 A1 - IAN 36453 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHKS 1350 A1 - IAN 36453 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHKS 1350 A1 - IAN 36453

Parkside PHKS 1350 A1 - IAN 36453 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info