Manual Parkside PHKS 1300 A1 - IAN 67034 (page 15 of 33) (English)

706381

Zoom out

Zoom in

1/33

13 GB/IE

Preparing for use

Switching off:

j Release the ON / OFF switch

Setting the cutting angle

You can set the cutting angle accurately with the

help of the cutting angle scale

12 b

j Release the wing screws / locking bolts of the

cutting angle preselector

on both sides, set

the desired angle on the cutting angle scale

12 b

and retighten the wing screws / locking bolts.

Setting the cutting depth

Note: If possible we recommend that the cutting

depth is set approximately 3 mm greater than the

material thickness. This should help to ensure you

achieve a clean cut.

j Release the wing screw on the cutting depth

setting clamp

, set the required cutting depth

on the scale

and retighten the wing screw.

Setting the guide fence

j Release the wing screw

of the base plate

and insert the guide fence

into the slot

Retighten the wing screw

Switching the laser on and oﬀ

Switching on:

j Move the laser ON / OFF switch

to setting “I”.

Switching off:

Move the laser ON / OFF switch

to setting “0”.

Note: If the batteries are exhausted replace them

with two 1.5 V alkaline batteries LR44 (e.g. GPA 76).

Working with the circular saw

1. Switch on the device as described in the section

about “Switching on and oﬀ” and then place it

ﬁrst with the front edge of the base plate

against the material.

2. Align the device using the guide fence

with reference to marked-out line or by using

the laser.

3. Hold the machine with both hands by the

handles (see Fig. A) and saw the material

with moderate pressure.

Setting the speed

j Turn the wheel

to the desired speed setting

(arrow marking G)

(1 = lowest speed / 6 = highest speed):

Use the general settings suggested in the following

table (information oﬀered without liability) or adjust

the speed setting on the setting wheel

to the

material being cut.

Material Speed

setting

Hard- and softwood (solid wood)

cut longitudinally and transversely

Plywood, hard ﬁbre board 6

Chipboard 6

Blockboard, laminated wood 6

Coated and veneered board 6

PVC board 3-5

Acrylic glass panels, Plexiglas 2-4

Aluminium board 4-6

Aluminium proﬁles 4-6

Plasterboard 1-2

Mineral wool board 1-2

Cement-bound chipboard 1-2

The circumferential speeds at minimum and maximum

rotational speeds are approx.:

Setting Rpm Metres/ sec

1 2200 21.8

6 5200 51.7

67034_par_Handkreissaege_PHKS1300A1_Content_LB6.indd 13 30.06.11 16:59

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHKS 1300 A1 - IAN 67034 in the language / languages: English as an attachment in your email.

The manual is 6,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHKS 1300 A1 - IAN 67034

Parkside PHKS 1300 A1 - IAN 67034 User Manual - German, Dutch, French, Italian - 60 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHKS 1300 A1 - IAN 67034 Manual

Product: