558603

Parkside PHKP 500 - KH 3119 Manual

5
Zoom out
Zoom in
Previous page
1/8
Next page
5
SPECIFIC SAFETY NOTES
̅ Before use always examine the gun, looking for loose parts or other objects, and bare or broken
wires. If there are any defects or conspicuous features on the device, interrupt the glueing
procedure immediately and have the glue gun repaired in the manufacturer's works, at his sales
outlet or at a specialist company.
̅ Do not use the device in the proximity of highly inflammable or potentially explosive materials.
̅ In order to avoid damaging the trigger, only pull this when the glue has melted completely.
̅ Do not leave the workplace while the glue gun is being used. Pull out the mains plug upon
completion of the glueing work.
̅ It is imperative that the glue gun is allowed to cool down completely on the relevant stand before
it is packed away.
̅ Do not touch the nozzle or the hot glue. To avoid the risk of burns do not touch the jet
or hot glue.
̅ Do not use in combination with water, steam, rain, a humid environment or highly inflammable
gases or liquids.
̅ Always keep the workplace clean and tidy.
̅ Beware of electric shocks. Avoid any contact with non-earthed parts, such as pipes or other
electrical appliances.
̅ Do not make accessible to children.
̅ Check the mains lead from time to time and get it renewed at a service centre if required.
̅ For your safety, we recommend that it is imperative for you to wear safety glasses or to use
a protective shield.
̅ Do not use outdoors.
̅ During pauses in work remove your finger from the trigger and pull out the mains plug.
̅ Handle the glueing gun with care and caution. Keep it clean, dry and free from oil or lubricating
greases.
USES FOR YOUR GLUE GUN
Figure ᕃ:
The glue gun has an integrated stand. Use this especially for preheating (as described in the
section on »How to use«) and for cooling the gun. If you set the gun down on its stand during
a pause in working, pull out the mains plug and do not leave the gun unattended.
Figure ᕄ:
Use the glue gun for maintenance jobs around the house, e.g. for fixing tiles. Make sure that
the surfaces to be glued are dry and free of grease. Roughen very smooth surfaces before
applying glue.
Figure ᕅ:
Use the gun for gluing metals, e.g. in toys. After application of the glue, press the parts to be
joined immediately together and hold the glued connection for about 30 seconds. After about
2 minutes the glued joint can be subjected to loads. As materials such as metals cause rapid
cooling of the glue, we recommend that you preheat the articles using the heat gun.
Figure ᕆ:
Use the gun for gluing plastics. When bonding HR foam always apply glue to the respective
counter or carrying part (e.g. in dots). Allow any excess glue to cool, after which it can be easily
removed using a sharp knife.
www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHKP 500 - KH 3119 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHKP 500 - KH 3119 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHKP 500 - KH 3119

Parkside PHKP 500 - KH 3119 User Manual - German, Dutch, French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info