576692
30
Zoom out
Zoom in
Previous page
1/35
Next page
30 GB
Introduction Introduction / General power tool safety warnings
Electric nailer / stapler PHET 15 A1
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as de-
scribed and for the specified applications. If you
pass the product on to anyone else, please ensure
that you also pass on all the documentation with it.
Intended use
The staple gun is for private use designed to staple
paper, insulating material, leather, fabric (manmade
and natural fibres) and similar material to softwood
or faux wood. Only use in dry areas. Any other use
s,
and / or modifications to the appliance, are deemed
to be improper usage and may result in serious phy-
sical injury. The manufacturer is not liable for damage
caused by improper use. This appliance is not in-
tended for commercial applications.
Features
1
Start lockout
2
Trigger
3
Magazine
3a
Unlocking device
4
Magazine well
5
Fill level indicator (Fine staples)
6
Fill level indicator (Nails)
Scope of delivery
1 Electric nailer / stapler PHET 15 A1
400 Staples 10 mm
100 Nails 14 mm
1 Operating instructions
Technical Data
Model: PHET 15 A1
Rated voltage: 230–240 V∼ 50 Hz
Rated input power: 45 W
Protection class: II /
Fine staples:
Type 53
6–14 mm
Width of staples: 11.4 mm externally
Staple lengths: 6–14 mm
Nails:
Type 47
14–15 mm
Nail lengths: 14–15 mm
Noise and vibration data:
Measured values for noise are determined in accord-
ance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level: 73.82 dB(A)
Sound power level: 84.82 dB(A)
Uncertainty K: 3 dB
Wear hearing protection!
Vibration total values determined according to
EN 60745:
Vibration emission value a
h
= 4.678 m / s
2
,
Uncertainty K = 1.5 m / s
2
.
The vibration level specified in
these instructions was measured in accordance with
an EN 60745 standardised measurement process
and can be used to compare equipment. The vibra-
tion emission value specified can also serve as a
preliminary assessment of the exposure.
The vibration level will change according to the ap-
plication of the electrical tool an in some cases may
exceed the value specified in these instructions. Re-
gularly using the electric tool in such a way may
make
it easy to underestimate the vibration.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHET 15 A1 - IAN 102685 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHET 15 A1 - IAN 102685 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info