762962
28
Zoom out
Zoom in
Previous page
1/128
Next page
22 GB/IE
2. Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
we hope your new tool brings you much enjoyment and suc-
cess.
NOTE:
According to the applicable product liability laws, the manu-
facturer of the device does not assume liability for damages
to the product or damages caused by the product that occurs
due to:
Improper handling,
Non-compliance of the operating instructions,
Repairs by third parties, by not authorised service techni-
cians,
Installation and replacement of non-original spare parts,
Use other than specified.
We recommend:
Read through the complete text in the operating instructions be-
fore installing and commissioning the device.
The operating instructions are intended to help the user to be-
come familiar with the machine and take advantage of its ap-
plication possibilities in accordance with the recommendations.
The operating instructions contain important information on
how to operate the machine safely, professionally and econom-
ically, how to avoid danger, costly repairs, reduce downtimes
and how to increase reliability and service life of the machine.
In addition to the safety regulations in the operating instruc-
tions, you have to meet the applicable regulations that apply
for the operation of the machine in your country.
Keep the operating instructions package with the machine at
all times and store it in a plastic cover to protect it from dirt and
moisture. Read the instruction manual each time before operat-
ing the machine and carefully follow its information.
The machine can only be operated by persons who were in-
structed concerning the operation of the machine and who are
informed about the associated dangers. The minimum age re-
quirement must be complied with.
In addition to the safety instructions contained in this operating
manual and the specific regulations of your country, the techni-
cal rules generally accepted for the operation of machines of
the same type must be observed.
We accept no liability for damage or accidents which arise
due to non-observance of these instructions and the safety in-
formation.
3. Device description (Fig. 1-14)
1. Bow-type handle
2. Hand spray gun
3. Trigger
4. Trigger lock
5. Upper spray gun holder
6. High-pressure hose
7. Tubular frame
8. Choke lever
9. Air filter
10. Tyres
11. Jet pipe
12. Lower spray gun holder
13. Hose holder
14. Filler cap
15. Fuel tank
16. Water outlet
17. Cleaning agent tank
18. Filler cap for cleaning agent tank
19. On/Off switch
20. Rubber foot
21. Water inlet
22. High-pressure pump
23. Carburettor
24. Spark plug/Spark plug connector
25. Silencer
26. Pull starter
27. Nozzles (red, yellow, green, white, black)
28. Self-tapping screw
29. Screws M6x45
30. Washer
31. Axles
32. R-clips
33. Rubber foot
34. Nut M6
35. Nozzle cleaner needle
36. Spark plug wrench
37. Filling hose with funnel
38. Spanner
39. Screwdriver
40. Quick connector
41. Hose connection adapter
42. Oil inlet
43. Oil tank cover with oil dipstick
44. Oil drain screw
4. Scope of delivery
Engine unit
Wheels
High-pressure hose
Hand spray gun
Jet pipe
High-pressure nozzle, (red, yellow, green, white)
Low-pressure nozzle / cleaning nozzle (black)
Rubber foot
Spark plug wrench
Spanner
Screwdriver
Upper and lower spray gun holder
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHDB 4 C3 - IAN 327193 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHDB 4 C3 - IAN 327193 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 6,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info