674490

Parkside PHD 150 F4 - IAN 291639 Manual

11
Zoom out
Zoom in
Previous page
1/46
Next page
11
CY
NIIEGB
water tap on until the water comes out
without bubbles.
2. Switch off the water tap.
3. Connect the supply hose to the water
connection (14) on the equipment us-
ing the quick connector for garden
hose adapter (25).
4. Fully open the water tap.
To vent the equipment:
5. Switch on the on/off switch (7) until
pressure has built up.
6. Switch off the on/off switch (7).
7. Press the on lever on the gun (16) until
the pressure has gone.
8. Please repeat process 5. to 7. a few
times until there is no more air in the
device.
B
• You can lock or unlock the start
lever (21) of the spray gun (16)
by pressing the locking button
(22).
Lock the starting lever (21) to
prevent the pressure cleaner
from being inadvertently / ac-
cidentally started.
Interrupting operation
• Release the lever of the gun (16).
• During prolonged work intervals turn
off the pressure cleaner by its ON /
OFF switch (7).
If the equipment falls over,
switch off the equipment
immediately at the on/off
switch (7) and disconnect the
equipment from the mains at
the mains power cord. Risk
of electric shock! Only now
should the equipment be re-
turned to an upright position.
For your own safety, wait
approx. 5 minutes before re-
connecting to the electricity.
Ending operation
1. After having worked with a detergent
rinse the pressure cleaner with clear
water.
2. Release the lever of the gun (16).
3. Turn off the pressure by its ON / OFF
switch (7). Disconnect the mains plug.
4. Turn off the water tap.
5. Disconnect the pressure cleaner from
the water mains.
6. Pull the lever of the gun (16) to vent the
pressure existing within the system.
Using detergents
The pressure cleaner was designed for
operation with a neutral detergent based
on a biologically decomposable anionic
tenside. Other detergents or chemical sub-
stances could impair the safety of the pres-
sure cleaner and damage it. Such damage
to the equipment is not covered by the
guarantee.
Cleaning and
Maintenance
Pull out the power plug before eve-
ry maintenance operation. This also
includes connecting to the water
supply or trying to eliminate leaks.
There is a risk of electrocution or of
injury from moving parts.
Cleaning
Never direct the water jet
against the pressure cleaner,
nor clean the pressure clean-
er under owing water. This
could give rise to the danger
of electric shock and damage
the pressure cleaner!
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHD 150 F4 - IAN 291639 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 150 F4 - IAN 291639 in the language / languages: English as an attachment in your email.

The manual is 4,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHD 150 F4 - IAN 291639

Parkside PHD 150 F4 - IAN 291639 User Manual - German, Dutch, Danish, French - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info