Manual Parkside PHD 150 C2 - IAN 93482 (page 34 of 46) (French)

655521

Zoom out

Zoom in

1/46

cian and meet the requirements of

IEC60364-1.

• The electrical installation shall be ac-

cording to national wiring rules.

• The device must only be connected to

a mains socket via a residual-current

circuit breaker (RCD) with a rated leak-

age current of not more than 30 mA.

Fuse: at least 13 ampere.

• Before each use, check the equipment,

cable and plug for damage.

• If the power cable for this equipment is

damaged, it must be replaced by the

manufacturer, a customer service agent

of the same or a similarly qualied per-

son in order to prevent hazards.

• Do not pull the plug from the socket by

the cable. Protect the cable from heat,

oil and sharp edges.

• Do not carry or x the equipment by

the cable.

• Use only extension cables that are pro-

tected from spray water and designed

for outdoor use. Always fully unroll a

cable drum before use. Check the ca-

ble for damage.

• Before any work on the equipment,

during work breaks and in the case

of non-use, remove the plug from the

socket.

• The cross-section of the power sup-

ply cable must not be less than

2x2,5mm².

• Wear sturdy footwear to protect

against electric shock.

• To protect against electric shock, oper-

ate the equipment only in an upright

position.

Start-up

In keeping with current regulations

a pressure cleaner must never be

operated off the drinking water

mains supply without a controllable

backow preventer. A suitable back-

check that the required electrical pro-

tection measures are in place.

• Do not operate the equipment if the

mains cable, water supply or other im-

portant parts such as the high-pressure

hose or gun are damaged/leaking.

• Protect the pressure cleaner from frost

and dry running.

• High-pressure hoses, ttings and

couplings are important for machine

safety. Use only high-pressure hoses,

ttings and couplings recommended by

the manufacturer.

• Use only original accessories and do

not carry out conversion work on the

equipment.

• Please read the notes in the operating

instructions on the topic of “mainte-

nance and cleaning”. Any measures

above and beyond these, particularly

opening the equipment, are to be car-

ried out by an authorised electrician.

In the case of repairs, always contact

our service centre.

Electrical safety:

Caution: to avoid accidents

and injuries from electric

shocks:

• The plug and socket of an extension

cable must be water-tight!

Unsuitable extension cables can

be dangerous as people can be

harmed by an electric shock!

• Protect the electric plug connections

against moisture.

• If there is a risk of ooding, x the

plug connections in an area that is safe

from ooding.

• Ensure that the mains voltage matches

the specications on the rating plate.

• Connection to the mains must be

carried out by an experienced electri-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 150 C2 - IAN 93482 in the language / languages: French as an attachment in your email.

The manual is 0,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHD 150 C2 - IAN 93482

Parkside PHD 150 C2 - IAN 93482 User Manual - English, German, Dutch - 46 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHD 150 C2 - IAN 93482 Manual

Product: