Manual Parkside PHD 150 C2 - IAN 93482 (page 37 of 46) (English, German, Dutch)

655521

Zoom out

Zoom in

1/46

Interrupting operation

• Release the lever of the gun (1).

• During prolonged work intervals turn

off the pressure cleaner by its ON /

OFF switch (10).

If the equipment falls over,

switch off the equipment

immediately at the on/

off switch (10) and discon-

nect the equipment from the

mains at the mains power

cord (6). Risk of electric

shock! Only now should the

equipment be returned to

an upright position. For your

own safety, wait approx. 5

minutes before reconnecting

to the electricity.

Ending operation

1. After having worked with a detergent

rinse the pressure cleaner with clear

water.

2. Release the lever of the gun (1).

3. Turn off the pressure by its ON / OFF

switch (10). Disconnect the mains plug.

4. Turn off the water tap.

5. Disconnect the pressure cleaner from

the water mains.

6. Pull the lever of the gun (1) to vent the

pressure existing within the system.

Using detergents

The pressure cleaner was designed for

operation with a neutral detergent based

on a biologically decomposable anionic

tenside. Other detergents or chemical sub-

stances could impair the safety of the pres-

sure cleaner and damage it. Such damage

to the equipment is not covered by the

guarantee. You can buy cleaning agents

from our online shop.

Fill/drain detergent:

• To add cleaning agent to the jet, you

must rst ll the cleaning agent tank

(15).

• To remove the cleaning agent tank

(15), hold it on the side and push it up-

wards. You can now pull the cleaning

agent tank out of the bottom and side

guides on the pressure cleaner. Mind

to rst remove the induction hose and

the cap from the opening of the clean-

ing agent tank (14) as they will remain

on the pressure cleaner.

• To reinstall the cleaning agent tank

(15), trace back the above steps.

Working Instructions:

• Operate the standard Vario nozzle

(18) in low-pressure mode to automati-

cally add cleaning agent to the water.

• The rotating wash brush (19) is always

in low-pressure mode and cleaning

agent will thus always be added to the

water.

• If you want to use the rotating wash

brush (19) without cleaning agents, the

cleaning agent tank (15) suction hose

must be placed in an empty cleaning

agent tank or leading outside.

Cleaning and

Maintenance

Pull out the power plug before eve-

ry maintenance operation. This also

includes connecting to the water

supply or trying to eliminate leaks.

There is a risk of electrocution or of

injury from moving parts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 150 C2 - IAN 93482 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHD 150 C2 - IAN 93482

Parkside PHD 150 C2 - IAN 93482 User Manual - French - 46 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHD 150 C2 - IAN 93482 Manual

Product: