595300
9
Zoom out
Zoom in
Previous page
1/18
Next page
9
IEGB
Interrupting operation
Release the lever of the gun (1).
During prolonged work intervals turn
off the washer by its ON / OFF switch
(10).
Ending operation
After having worked with a detergent
rinse the washer with clear water.
Release the lever of the gun (1).
Turn off the pressure by its ON / OFF
switch (10).
Turn off the water tap.
Disconnect the pressure washer from
the water mains.
Pull the lever of the gun (1) to vent the
pressure existing within the system.
Disconnect the mains plug.
Using detergents
The washer was designed for operation
with a neutral detergent based on a bio-
logically decomposable anionic tenside.
Other detergents or chemical substances
could impair the safety of the washer and
damage it.
To add cleaning agent to the jet, you
must rst ll the cleaning agent tank
(15).
Operate the jet tube with at spray
nozzle (18) in low-pressure mode to
automatically add cleaning agent to
the water.
The rotating brush (19) is always
in low-pressure mode and cleaning
agent will thus always be added to the
water.
To operate the rotating brush (19)
without any cleaning agent, remove
the cleaning agent tank (15).
To remove the cleaning agent tank
(15), hold it on the side and push it
upwards. You can now pull the clean-
ing agent tank out of the bottom and
side guides on the pressure washer.
Mind to rst remove the induction
hose and the cap from the opening of
the cleaning agent tank (13) as they
will remain on the pressure washer.
To reinstall the cleaning agent tank,
trace back the above steps.
Cleaning and
Maintenance
Pull out the power plug before every
maintenance operation. There is a
risk of electrocution or of injury from
moving parts.
Cleaning
Never direct the water jet against
the washer, nor clean the washer
under owing water. This could
give rise to the dangerofelectric
shock and damage the washer! .
Alwayskeepthewasherclean.Donot
useanydetergentsorsolvents.
Always keep the ventilation slots
clean and free.
Only clean the pressure washer with a
soft brush or a slightly moist cloth.
In case a nozzle of the jet tube (17/18)
is clogged up, use the nozzle cleaning
pin (21) to remove the object from the
nozzle.
9


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-phd-150-a1---ian-55991

Reset search

  • I have filled the detergent box up and it does not seem to be emptying is there any way I could clean the tube or where it goes in to the park side Phd 150A1 Submitted on 19-11-2022 at 15:01

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHD 150 A1 - IAN 55991 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 150 A1 - IAN 55991 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHD 150 A1 - IAN 55991

Parkside PHD 150 A1 - IAN 55991 User Manual - German, Dutch, French, Italian - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info