762956
8
Zoom out
Zoom in
Previous page
1/50
Next page
GB NIIE CY
8
the plug connections in an area
that is safe from ooding.
Ensure that the mains voltage
matches the specications on
the rating plate.
The electrical installation shall
be according to national wiring
rules.
Connection to the mains must
be carried out by an experi-
enced electrician and meet the
requirements of IEC60364-1.
The device must only be con-
nected to a mains socket via a
residual-current circuit breaker
(RCD) with a rated leakage cur-
rent of not more than 30mA.
Fuse: at least 13 ampere.
Before each use, check the
equipment, cable and plug for
damage.
If the power cable for this equip-
ment is damaged, it must be
replaced by the manufacturer,
a customer service agent of the
same or a similarly qualied per-
son in order to prevent hazards.
Do not pull the plug from the
socket by the cable. Protect the
cable from heat, oil and sharp
edges.
Do not carry or x the equip-
ment by the cable.
Use only extension cables that
are protected from spray water
and designed for outdoor use.
Always fully unroll a cable
drum before use. Check the ca-
ble for damage.
Before any work on the equip-
ment, during work breaks and
in the case of non-use, remove
the plug from the socket.
Always shut off the power
Use only original accessories
and do not carry out conversion
work on the equipment.
Please read the notes in the op-
erating instructions on the topic
of “maintenance and cleaning”.
Any measures above and be-
yond these, particularly open-
ing the equipment, are to be
carried out by an electrician. In
the case of repairs, always con-
tact our service centre.
Water that has passed through
a backow preventer is classi-
ed as undrinkable.
High-pressure hoses, ttings
and couplings are important
for machine safety. Use only
high-pressure hoses, ttings and
couplings recommended by the
manufacturer.
To ensure machine safety, use
only original replacement parts
from the manufacturer or re-
placement parts authorised by
the manufacturer.
Electrical safety:
Caution: to avoid accidents
and injuries from electric
shocks:
The plug and socket of an exten-
sion cable must be water-tight!
Unsuitable extension cables
can be dangerous as people
can be harmed by an electric
shock!
Protect the electric plug connec-
tions against moisture.
If there is a risk of ooding, x
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHD 110 D1 - IAN 360333 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 110 D1 - IAN 360333 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHD 110 D1 - IAN 360333

Parkside PHD 110 D1 - IAN 360333 User Manual - German - 22 pages

Parkside PHD 110 D1 - IAN 360333 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info