595317
11
Zoom out
Zoom in
Previous page
1/80
Next page
11
GB
To do so, press both bolts (16) down-
wards. The wheels are now no longer
able to turn.
To cancel the wheel xing, push the
two bolts (16) upwards.
Cleaning and
Maintenance
Pull out the power plug before
every maintenance operation. There
is a risk of electrocution or of injury
from moving parts.
Cleaning
Never direct the water jet
against the washer, nor clean
the washer under owing
water. This could give rise to
the danger of electric shock
and damage the washer! .
Always keep the washer clean. Do
not use any detergents or solvents.
Always keep the ventilation slots clean
and free.
Only clean the pressure washer with a
soft brush or a slightly moist cloth.
In case a nozzle of the jet tube (
A
12/13) is clogged up, use the nozzle
cleaning pin (
A
7) to remove the ob-
ject from the nozzle.
E
If necessary, take off the water con-
nection with the lter insert (9) and
clean the lter insert.
Maintenance
The pressure washer is maintenance free.
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts.
Storage
Drain all the water from the pressure
washer. Disconnect the unit from the
water supply. Press the On/Off switch
(
A
5) to turn on the pressure washer
for no longer than 1 minute until no
more water escapes from the high-
pressure connection (
A
3). Turn off the
unit.
Wind up the mains cable.
Protect the pressure washer and its ac-
cessories from frost when they have not
been completely drained of all water.
Store the pressure washer and its ac-
cessories in a frost-free room.
To transport or put away the equip-
ment, use only the carrying handle.
Store the equipment only in a horizon-
tal position in order to protect it from
any damage.
Waste Disposal and En-
vironmental Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have nished with
them.
Electric appliances should not be dis-
posed of in the domestic garbage.
Hand the tool in at a recycling centre. The
plastics and metal parts can be separated
and recycled. Ask your Service Center about
this.
We can carry out a waste disposal of your
device free of charge.
11


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-phd-100-e2---ian-104473

Reset search

  • El motor no enciende y el cableado e iinterruptor , on- off, están bien, según comprobación de un electricista.puede estar quemado el motor?.tiene algún fusible de seguridad?.en el primer caso, merece la pena cambiarlo?. Submitted on 27-7-2020 at 19:56

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHD 100 E2 - IAN 104473 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 100 E2 - IAN 104473 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info