Manual Parkside PHD 100 E2 - IAN 104473 (page 7 of 80) (English, German, Dutch, French, Swedish, Finnish)

595317

Zoom out

Zoom in

1/80

tection.

• In the event of a fault or defect dur-

ing operation, immediately switch off

and unplug the equipment. Then read

page 40 of the operating instructions

for possible fault causes or contact our

service centre.

Working with the equipment

Caution: to avoid accidents

and injuries:

CAUTION. pressure wash-

ers can be dangerous if

they are not operated cor-

rectly! The jet must never

be directed at people,

animals, electric equipment

connected to the power

supply or against the actual

pressure washer.

• Do not direct the jet at yourself or oth-

ers in order to clean clothes and shoes.

• Do not operate the pressure washer

when other people are in the immedi-

ate vicinity, other than they are also

wearing protective clothes.

• Always use the spray gun with both

hands. This will enable you to safely

counter the recoil force from the emerg-

ing water jet.

• Take appropriate measures to keep

children away from the equipment

whilst it is running.

• Dispose of the packaging material cor-

rectly.

• Do not use the equipment in the vicinity

of ammable liquids or gases. Non-

observance will result in a risk of re

or explosion.

• Do not spray combustible liquids. Risk

of explosion.

• Store the equipment in a dry place and

out of reach of children.

• Children must be supervised in order

to ensure that they do not play with the

equipment.

• Ensure that no exhaust emissions occur

within the vicinity of air inlets.

Caution! To avoid damage to the

equipment and any possible

person injury resulting from this:

• Do not work with damaged or incom-

plete equipment, or with equipment

that has been converted without the

approval of the manufacturer. Before

initial operation, have a specialist

check that the required electrical pro-

tection measures are in place.

• Never operate the pressure washer if

the power supply cable or other impor-

tant parts, such as the high-pressure

hose or the gun, are damaged.

• Protect the pressure washer from frost

and dry running.

• Use only original accessories and do

not carry out conversion work on the

equipment.

• Please read the notes in the operating

instructions on the topic of “mainte-

nance and cleaning”. Any measures

above and beyond these, particularly

opening the equipment, are to be car-

ried out by an electrician. In the case

of repairs, always contact our service

centre.

• The washer was designed for opera-

tion with a neutral detergent based on

a biologically decomposable anionic

tenside. Other detergents or chemical

substances could impair the safety of

the washer and damage it.

• If you come into contact with cleaning

agents, rinse with plenty of clean water.

El motor no enciende y el cableado e iinterruptor , on- off, están bien, según comprobación de un electricista.puede estar quemado el motor?.tiene algún fusible de seguridad?.en el primer caso, merece la pena cambiarlo?. Submitted on 27-7-2020 at 19:56
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 100 E2 - IAN 104473 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 1,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHD 100 E2 - IAN 104473 Manual

Product: