Manual Parkside PHD 100 D2 - IAN 63638 (page 34 of 48) (French)

595426

Zoom out

Zoom in

1/48

• Do not pull the plug from the socket by

the cable. Protect the cable from heat,

oil and sharp edges.

• Do not carry or x the equipment by

the cable.

• Use only extension cables that are pro-

tected from spray water and designed

for outdoor use. Always fully unroll a

cable drum before use. Check the ca-

ble for damage.

• Before any work on the equipment,

during work breaks and in the case

of non-use, remove the plug from the

socket.

• The cross-section of the power supply

cable must not be less than 2 x 2,5

mm².

• Wear sturdy footwear to protect

against electric shock.

• Warning ! Inadequate extension

cords can be dangerous. If an exten-

sion cord is used, it shall be suitable

for outdoor use, and the connection

has to be kept dry and off the ground.

It is recommended that this is accom-

plished by means of a cord reel which

keeps the socket at least 60 mm above

the ground.

Start-up

In keeping with current regulations

a pressure washer must never be

operated off the drinking water

mains supply without a controlla-

ble backow preventer. A suitable

backow preventer in conformity

with EN 12729 type BA must be

used.

Water that has passed through a backow

preventer is classied as undrinkable.

A backow preventer is available

from specialist retailers.

• Employ an ordinary garden hose for

the water intake and ensure sufcient

length.

Setting up

• Screw the equipment side of the

high-pressure hose connection

(2) to the high-pressure hose con-

nection (3) on the equipment.

• Screw the gun side of the high-

pressure hose connection (1) to

the spray gun (10)

• Establish the water supply by

connecting the rapid-action wa-

ter supply connector to the water

connection with sieve insert (8).

• Connect to the spray gun (10)

by inserting and screwing in the

jet tube (11).

• If the jet pipe (11) is tted, screw

in with the jet pipe (11) to con-

nect either the adjustable fan

nozzle (12) or the high pressure

nozzle (13).

Screw in to connect the deter-

gent container with nozzle (14)

directly to the spray gun (10).

With using the cleaning agent

container with the nozzle (

14), pour only cleaning agent

into the container. It is sucked in

automatically.

The width of the jet can be increased by

turning the end of the nozzle to the left. To

reduce the width of the jet, turn the end of

the nozzle to the right.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 100 D2 - IAN 63638 in the language / languages: French as an attachment in your email.

The manual is 2,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHD 100 D2 - IAN 63638

Parkside PHD 100 D2 - IAN 63638 User Manual - English, German, Dutch - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PHD 100 D2 - IAN 63638 Manual

Product: