621606
9
Zoom out
Zoom in
Previous page
1/18
Next page
9
GB IE
connecting the rapid-action wa-
ter supply connector to the wa-
ter connection with sieve insert
(8).
C
Connect to the spray gun (10)
by inserting and screwing in the
jet tube (11).
If the jet tube (11) is tted, con-
nect either the adjustable fan
nozzle (12), high-pressure jet
(13) or cleaning agent container
to the nozzle (14) by screwing
together with the jet tube (11).
With using the cleaning agent
container with the nozzle (
A
14), pour only cleaning agent
into the container. It is sucked in
automatically.
The width of the jet can be increased by
turning the end of the nozzle to the left. To
reduce the width of the jet, turn the end of
the nozzle to the right.
Mains connection
The pressure washer you have acquired
is already tted with a mains plug. The
pressure washer must only be connected
to an earthed socket 230 V ~ 50Hz.
Only operate the pressure washer
after all the above points have
been observed.
Ensure that the pressure washer is
turned off by its ON / OFF switch (
A
5).
Insert the mains plug into the mains
socket
Scope of Delivery
Unpack the pressure washer and verify
the contents:
- Pressure washer
- Chassis
- Gun
- High-pressure hose
- Jet lance
- High-pressure nozzle
- Adjustable at-jet nozzle
- Cleaning agent container with nozzle
- Nozzle cleaning pin
Start-up
In keeping with current regulations
a pressure washer must never be
operated off the drinking water
mains supply without a controlla-
ble backow preventer. A suitable
backow preventer in conformity
with EN 12729 type BA must be
used.
Water that has passed through a backow
preventer is classied as undrinkable.
A backow preventer is available
from specialist retailers.
Setting up
B
Screw the equipment side of the
high-pressure hose connection
(2) to the high-pressure hose
connection (3) on the equip-
ment.
Screw the gun side of the high-
pressure hose connection (1) to
the spray gun (10)
Establish the water supply by
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PHD 100 A1 - IAN 63822 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PHD 100 A1 - IAN 63822 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PHD 100 A1 - IAN 63822

Parkside PHD 100 A1 - IAN 63822 User Manual - German, Dutch, French, Italian - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info