Manual Parkside PGS 500 A1 - IAN 303129 (page 23 of 88) (German, Dutch, French, Portuguese, Spanish)

679462

Zoom out

Zoom in

1/88

PGS 500 A1

■ 20

│

Supplementary safety instructions

for working with wire brushes

Special safety instructions for working with

wire brushes:

a) Be aware that the wire brush loses wire

bristles even during normal operation. Do

not overstress the wires by applying exces-

sive pressure to the brush. The wire bristles

can easily penetrate thin clothing and/or skin.

b) Allow the brush to run at working speed

for at least one minute before applying

it to the workpiece. Ensure that no one is

standing in front of or in line with the brush

during this time. Loose pieces of wire can

become airborne during the run-in period.

c) Aim the rotating steel brush away from

yourself. When working with these brushes,

small particles and minute pieces of wire can ﬂy

oﬀ at great speed and pierce skin.

Original accessories/auxiliary

equipment

■ Use only the accessories and auxiliary equip-

ment that are speciﬁed in the operating instruc-

tions and are compatible with the appliance.

Use

Changing/inserting the tool/collet

chuck

♦ Press the spindle lock and hold it down.

♦ Loosen the tensioning nut from the thread

using the assembly wrench .

♦ Remove any tool that may be inserted.

♦ First, push the intended tool through the tension-

ing nut

before inserting it into the appropri-

ate collet chuck

for the tool shaft.

♦ Press the spindle lock

and hold it down.

♦ Push the (6 mm) collet chuck

into the thread

insert and screw the tensioning nut tight with

the assembly wrench .

♦ To use the (3.2 mm) collet chuck

, insert it

into the pre-assembled (6 mm) collet chuck .

■ Observe the manufacturer‘s recommendation

for small grinding tools. The maximum permissi-

ble protrusion (L0 = length of the shaft between

the collet chuck end and the small grinding

tool) speciﬁed by the manufacturer must not be

exceeded when using small grinding tools! If

the protrusion (L0) is increased, the permissible

rotation speed must be lowered. Wherever pos-

sible, insert the complete length of the shaft of

the accessory tool into the collet chuck. Ensure

that the clamping length (Lg) is at least 10 mm.

Only use attachment parts with a maximum

mandrel length of 40 mm.

Grinding stone

♦ Grinding work can be performed on various

metals using the grinding stone

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PGS 500 A1 - IAN 303129 in the language / languages: German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PGS 500 A1 - IAN 303129 Manual

Product: