595339

Parkside PFBS 160 A1 - IAN 103358 Manual

6
Zoom out
Zoom in
Previous page
1/45
Next page
6 GB/IE
Introduction
Precision Multi-Grinder PFBS 160 A1
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as de
scribed
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Intended use
The precision multi-grinder, hereafter also referred
to as tool, is intended for drilling, milling, engrav-
ing, polishing, cleaning, sanding, and cutting
wood, metal, plastic, ceramics or masonry in dry
areas. Any other uses, and / or modifications to the
tool are considered improper use and may result in
serious hazards. Not for commercial applications.
Features
Precision Multi-Grinder:
1
ON / OFF switch
2
Mains lead
3
Metal bracket
4
Louvres
5
Union nut
6
Clamping nut
7
Collet 3.2 mm
8
Spindle lock button
9
Carbon brushes cover
10
Variable speed control
Accessories (see Fig. A):
11
Locking screw
12
Base assembly
13
Flexible shaft
13 b
Union nut (Flexible shaft)
14
Collet chuck
15
Stand support
16
Stretch stand
17
Clamp
Accessory kit (42 pieces) (see Fig. B):
18
8 Cutting discs
19
6 Cutting discs
20
5 Grinding bits, abrasive
21
2 Grinding discs, abrasive
22
3 Polishing attachments
23
1 Brick
24
5 Sanding belts
25
1 Clamping mandrel for polishing attachments
26
2 Engraving bits
27
1 Milling bit
28
1 Drill bit
29
1 Clamping mandrel for cut-off / grinding discs
30
2 Plastic brushes
31
1 Metal brush
32
1 Collet 2.4 mm
33
1 Combination wrench
34
1 Sanding belt clamping mandrel
Scope of delivery
1 Precision Multi-Grinder PFBS 160 A1
1 Plastic case
1 Flexible shaft
1 Stretch stand
1 Clamp
1 Base assembly
1 Accessory kit 42 pieces
1 Set of operating instructions
Technical Data
Rated power input: 160 W
Voltage: 230–240 V∼, 50 Hz
Idle speed (n): 10,000–35,000 min
-1
Tool holder: max. 3.2 mm
Max. disc ø: 25 mm
Protection class: II /
Introduction / General power tool safety warnings
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PFBS 160 A1 - IAN 103358 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PFBS 160 A1 - IAN 103358 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PFBS 160 A1 - IAN 103358

Parkside PFBS 160 A1 - IAN 103358 User Manual - French, Italian - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info