679271

Parkside PET 25 - KH 3050 - IAN 46175 Manual

9
Zoom out
Zoom in
Previous page
1/20
Next page
10 GB/IE/CY
Before use
Loading the magazine
Squeeze the end of the magazine slider
4
(see Fig. A).
Pull the magazine slider
4
out of the magazine
5
(see Fig. B).
Fill the magazine
5
with staples or nails
(see Fig. C).
Note on filling with nails: Use the right-
hand slot for filling with nails as shown in the
detailed image in Fig. C. Ensure that the nail
heads are all at the top.
NOTE: Observe the maximum capacity of ap-
prox. 85 staples or approx. 75 nails when filling.
After filling, push the magazine slider
4
into
the magazine
5
as far as it will go until you
hear and feel it engage.
NOTE: The magazine filling level indicator
6
allows you to see whether there are still staples
in the magazine.
Setting the impact force
NOTE: Select the lowest impact force necessary
for your stapling.
Take into account the length of the staples or nails
to be used and the strength of the materials to be
joined.
Turn the impact force controller
3
in the
direction / anticlockwise to increase the impact
force.
Turn the impact force controller
3
in the
direction / clockwise to decrease the impact
force.
Use
Switching on and off
Set the ON / OFF switch
2
to position “I” to
switch on the device.
Set the ON / OFF switch
2
to position “0” to
switch off the device.
Stapling / nailing
Switch the device on by setting the ON / OFF
switch
2
to position “I”.
Press the device with its front plate
7
at the
point on the surface of the material where you
wish to staple or nail.
Press the trigger
1
.
NOTE: The integral safety lock in the front
plate prevents unintentional firing.
Troubleshooting
Cause:
A staple or nail is blocking the device.
Solution:
Open the magazine slider
4
. This releases
the pretension. Release the screws on the front
plate
7
using the Allen key (Fig. D).
Remove the staple or nail.
Maintenance and cleaning
WARNING!
DANGER OF INJURY! Pull
the mains plug out of the mains socket before you
clean or maintain the device.
The electric nailer / stapler is designed to be main-
tenance-free.
Always keep the device clean, dry and free
from oil or grease.
Clean the device immediately after you have
finished using it.
Do not allow any liquids to enter the device.
Use a cloth to clean the housing. Never use
petrol, solvents or cleaning agents that might
attack plastic.
Service
WARNING!
Have your device
repaired at the service centre or by
qualified specialist personnel using
Before use / Use / Maintenance and cleaning / Service
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PET 25 - KH 3050 - IAN 46175 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PET 25 - KH 3050 - IAN 46175 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PET 25 - KH 3050 - IAN 46175

Parkside PET 25 - KH 3050 - IAN 46175 User Manual - German, Dutch, French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info