595294

Parkside PES 200 B1 - IAN 88931 Manual

33
Zoom out
Zoom in
Previous page
1/37
Next page
33 GB
General safety advice for electrical power tools / Before taking tool into useGeneral safety advice for electrical power tools
firmly. This is much safer than holding it in
your hand.
Wear protective glasses! Pieces of mate-
rial may split off the workpiece and become
projectiles. This could cause injury.
Wear a dust mask! A dust mask must be
worn for prolonged work on wood or when
working on materials that give rise to hazard-
ous dusts.
Do not soak the materials or the area
to be worked with liquids containing
solvents. Unhealthy / poisonous gases may
develop from the heat generated by scraping.
Materials containing asbestos may
not be worked. Asbestos is considered to
be a carcinogen.
Under no circumstances should you
place your hands next to or in front of
the appliance or on the area to be
worked, you could be seriously injured if you
slip or stumble.
Always have the cable leading away to the
rear of the appliance.
In the event of danger, immediately remove the
plug from the power socket.
Q
Original ancillaries / accessories
Use only the ancillaries and accessories
that are detailed in the operating in-
structions. The use of ancillaries and acces-
sories other than those recommended in the
operating instructions could lead to an increased
risk of personal injury for you.
Q
Understood everything?
When you have made yourself familiar with
these general safety instructions for electrical
hand tool, then you can start with the work. You
will work at your safest when taking note of the
manufacturer‘s declarations and instructions.
Q
Before taking tool into use
Q
Attachment tools
The choice of the correct attachment tool is depend-
ant on the job to be done.
The supplied accessories are suitable for the most
widespread areas of application (see Figs. C, D, E,
F and G).
5
Knife / Scraper attachment (offset)
6
Knife / Scraper attachment (straight), e.g. for
removing carpets, felts, cork sheets as well as
plaster and adhesive residues (see Fig. C, E)
7
Spatula attachment (flat), e.g. for removing
paint residues, silicon and foams (see Fig. D)
8
Chisel attachment (flat), e.g. for carving soft
woods (see Fig. F)
9
Carving chisel (13 mm), e.g. for carving in
softwoods (see Fig. G)
Q
Changing attachments
Wear suitable protective gloves when inserting and
testing attachments tool
4
.
Notice: The curve / working edge of the attachment
tool
4
must always point downwards.
Inserting a tool attachment:
Push the tool lock
2
forwards to “UNLOCK”.
Insert the attachment tool
4
as far as it will go
in the tool receptor
3
(see Fig. A).
Push the tool lock
2
backwards to “LOCK” -
the tool attachment is locked.
Removing a tool attachment:
Push the tool lock
2
forwards to “UNLOCK”.
Remove the inserted tool attachment
4
from
the tool receptor
3
.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PES 200 B1 - IAN 88931 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PES 200 B1 - IAN 88931 in the language / languages: French, Italian as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PES 200 B1 - IAN 88931

Parkside PES 200 B1 - IAN 88931 User Manual - English, German, Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info