Manual Parkside PES 200 B1 - IAN 88931 (page 30 of 37) (French, Italian)

595294

Zoom out

Zoom in

1/37

30 GB

Introduction / General safety advice for electrical power toolsIntroduction

Electric Scraper PES 200 B1

Introduction

We congratulate you on the purchase of your new

device. You have chosen a high quality product.

The instructions for use are part of the product. They

contain important information concerning safety,

use and disposal. Before using the product, please

familiarise yourself with all of the safety information

and instructions for use. Only use the unit as descri-

bed and for the speciﬁed applications. If you pass

the product on to anyone else, please ensure that

you also pass on all the documentation with it.

Intended Utilisation

The appliance is suitable for the removal and abra-

sion of coverings such as carpets, felts, cork sheets

and plaster on small areas. It is also intended for

removing residues of adhesives, paints and ﬁllers,

for the smoothing of coarse surfaces as well as for

carvings on soft woods. Any other use of, and

modiﬁcation to, the appliance is deemed to be

improper usage and may result in serious physical

injury. The manufacturer declines to accept respon-

sibility for damage(s) arising out of usage contrary

to the instructions speciﬁed below. The appliance is

not intended for commercial application.

Fittings

ON / OFF switch / Stroke rate preselector

Tool arrestor

Tool receptor

Tool attachment

Knife / Scraper attachment (oﬀset)

Knife / Scraper attachment (straight)

Spatula attachment

Chisel attachment

Carving chisel attachment

Items supplied

1 Electric Scraper PES 200 B1

1 Knife / Scraper attachment (oﬀset)

1 Knife / Scraper attachment (straight)

1 Spatula attachment

1 Chisel attachment

1 Carving chisel attachment

1 Operating manual

Technical Data

Rated voltage: 230 V

50 Hz

Nominal power consumption:

200 W

Nominal stroke rate: Level I: n

6500 min

-1

Level II: n

7500 min

-1

Level III: n

8500 min

-1

Stroke: ca. 2 mm

Protection class: II /

Noise and vibration data:

Measured values for noise are determined in accor-

dance with EN 60745. The A-weighted noise level

of the electrical power tool are typically:

Sound pressure level: 77.50 dB(A)

Sound power level: 88.50 dB(A)

Uncertainty K: 3 dB

Wear ear protection!

Evaluated acceleration, typical:

Hand / arm vibration a

= 2.066 m / s

Uncertainty K = 1.5 m / s

The vibration level speciﬁed in

these instructions was measured in accordance with

an EN 60745 standardised measurement process

and can be used to compare equipment. The vibra-

tion emission value speciﬁed can also serve as a

preliminary assessment of the exposure.

The vibration level will change according to the ap-

plication of the electrical tool an in some cases may

exceed the value speciﬁed in these instructions. Re-

gularly using the electric tool in such a way may

make it easy to underestimate the vibration.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PES 200 B1 - IAN 88931 in the language / languages: French, Italian as an attachment in your email.

The manual is 1,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PES 200 B1 - IAN 88931

Parkside PES 200 B1 - IAN 88931 User Manual - English, German, Dutch - 29 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PES 200 B1 - IAN 88931 Manual

Product: