Manual Parkside PES 200 B1 - IAN 64186 (page 33 of 45) (English, Portuguese, Spanish)

595290

Zoom out

Zoom in

1/45

33 GB/MT

General safety advice for electrical power tools / Before taking tool into use

and advice. Electrical power tools are dan-

gerous when they are used by inexperienced

people.

e) Look after the device carefully. Check

that moving parts are working prop-

erly and move freely. Check for any

parts that are broken or damaged

enough to detrimentally affect the

functioning of the device. Have dam-

aged parts repaired before you use

the device. Many accidents have their origins

in poorly maintained electrical power tools.

f) Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp

cutting edges are less likely to jam and are

easier to control.

g) Use the electrical power tool, accesso-

ries, inserted tools etc. in accordance

with these instructions and advice, and

the stipulations drawn up for this par-

ticular type of device. In doing this, take

into account the working conditions

and the task in hand. The use of electrical

power tools for purposes other than those in-

tended can lead to dangerous situations.

Safety advice for

power scraper

Avoiding the danger of injury, fire and

damage to your health:

 Securely support the workpiece. Use

clamps or a vice to grip the workpiece

firmly. This is much safer than holding it in

your hand.



Wear protective glasses! Pieces

of material may split oﬀ the work-

piece and become projectiles.

This could cause injury.



Wear a dust mask! A dust mask

must be worn for prolonged work on

wood or when working on materials

that give rise to hazardous dusts.

 Do not soak the materials or the area

to be worked with liquids containing

solvents. Unhealthy / poisonous gases may

develop from the heat generated by scraping.

 Materials containing asbestos may

not be worked. Asbestos is considered to

be a carcinogen.

 Under no circumstances should you

place your hands next to or in front of

the appliance or on the area to be

worked, you could be seriously injured if you

slip or stumble.

 Always have the cable leading away to the

rear of the appliance.

 In the event of danger, immediately remove the

plug from the power socket.



Original ancillaries / accessories

 Use only the ancillaries and accessories

that are detailed in the operating in-

structions. The use of ancillaries and acces-

sories other than those recommended in the

operating instructions could lead to an increased

risk of personal injury for you.



Understood everything?

 When you have made yourself familiar with

these general safety instructions for electrical

hand tool, then you can start with the work. You

will work at your safest when taking note of the

manufacturer‘s declarations and instructions.



Before taking tool into use



Attachment tools

The choice of the correct attachment tool is de-

pendant on the job to be done.

The supplied accessories are suitable for the most

widespread areas of application (see Figs. C, D, E,

F and G).

Knife / Scraper attachment (oﬀset)

Knife / Scraper attachment (straight), e.g. for

removing carpets, felts, cork sheets as well as

plaster and adhesive residues (see Fig. C, E)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PES 200 B1 - IAN 64186 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 0,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PES 200 B1 - IAN 64186

Parkside PES 200 B1 - IAN 64186 User Manual - German, Dutch, French, Italian - 37 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PES 200 B1 - IAN 64186 Manual

Product: