679460

Parkside PEH 30 C3 - IAN 303564 Manual

10
Zoom out
Zoom in
Previous page
1/39
Next page
PEH 30 C3
■ 6 
│
 GB
│
IE
│
NI
│
CY
Original accessories/auxiliary
equipment
■ Use only the auxiliary equipment and acces-
sories specified in the operating instructions.
Using parts or accessories other than those
recommended in the operating instructions can
lead to a risk of injury.
Operation
Switching on and off
Switching on:
♦ First, press the safety lock-out .
♦ Then press and hold the ON/OFF switch .
Switching off:
♦ Release the ON/OFF switch .
NOTE
►
For safety reasons, the ON/OFF switch
cannot be locked.
Setting the cut depth
Use the dial to set the cutting depth in stages
(level 1–3) according to the cut depth scale .
Dust/chip extraction (see fig.A)
WARNING!
Always wear a dust mask!
WARNING! RISK OF INJURY
► Always remove the plug from the power
socket before working on the appliance.
Adjustable chip ejector (left/right):
♦ Unlock the chip ejector by turning it in
the opposite direction to the arrow (from the
“LOCK” position).
♦ Pull the chip ejector out of the appliance.
♦ The chip ejector can be attached to the
plane on the left or the right.
♦ Push the chip ejector into the appliance.
♦ Lock the chip ejector by turning it to the
position “LOCK”.
External extraction:
When using dust extraction systems, e.g. a work-
shop extractor, it may be necessary to use the
adapter for external extraction
. The vacuum
cleaner must be suitable for the material being
processed.
Connecting:
♦ Push the adapter for external extraction
firmly into the chip ejector .
♦ Push the hose of a suitable dust extraction ap-
pliance (e.g. a workshop vacuum cleaner) onto
the chip ejector (or the adapter for external
extraction , if required).
Removal:
♦ Pull the hose of the vacuum cleaner off the chip
ejector or the adapter.
♦ Pull the adapter for external extraction off.
Parking shoe (see fig. B)
The parking shoe allows you to put down the
appliance without risking damage to the work-
piece. While working, the parking shoe is
flipped up and rear part of the plane sole is
exposed.
Planing
CAUTION! RISK OF KICKBACK!
Always switch the appliance on before applying
it to the workpiece.
♦ Set desired cut depth.
♦ Switch the appliance on.
♦ Place the appliance with the front part of the
plane sole on the workpiece.
♦ Move the appliance with straight, even motions
over the workpiece.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PEH 30 C3 - IAN 303564 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PEH 30 C3 - IAN 303564 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PEH 30 C3 - IAN 303564

Parkside PEH 30 C3 - IAN 303564 User Manual - German, Dutch - 29 pages

Parkside PEH 30 C3 - IAN 303564 User Manual - Danish, French, Polish - 87 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info