679460
6
Zoom out
Zoom in
Previous page
1/39
Next page
PEH 30 C3
2 
GB
IE
NI
CY
ELECTRIC PLANER PEH 30 C3
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
The appliance is designed for planing workpieces
such as beams or planks that are firmly held in
place. The appliance is also suitable for chamfer-
ing edges and for grooving. Any other uses of or
modifications to the appliance are deemed to be
improper usage and may result in serious physical
injury. The manufacturer accepts no responsibility
for damage(s) attributable to misuse. This appli-
ance is not intended for commercial use.
Equipment
Safety lock-out
ON/OFF switch
Chip ejector (optionally right/left)
Belt cover
Screws for belt cover
Rip fence
Fastening screw for rip fence
Lock nut for setting the fold width
8a
Connecting piece
8b
Connecting screw
8c
Washer
Plane sole
V grooves
Fastening screw for the fold depth stop
Fold depth stop
Dial for setting the cut depth (additional handle)
Cut depth scale
Adapter for external extraction
Parking shoe
Cutter block
Clamping element
Fastening screw for the planing blade
Planing blade
20a
Tensioning plate groove
Lateral cutter block guard
Hex key
Drive belt
Large belt wheel
Small belt wheel
Open-ended spanner
Package contents
1 electric planer PEH 30 C3
1 guide fence
1 fold depth stop
1 hex key
1 open-ended spanner
1 adapter for external extraction
1 operating manual
Technical data
Rated voltage: 230 V ∼ 50 Hz (AC)
Nominal output: 750W
Rated idle
speed: n
0
13000 rpm
Plane width: 82 mm
Cut depth: 0–3 mm
Fold depth: max. 24 mm
Protection class: II /
(double insulation)
Noise and vibration data:
Noise measurement value determined in accordance
with EN 62841. The A-rated noise level of the
power tool is typically as follows:
Noise emission value:
Sound pressure level: L
PA
= 97 dB(A)
Sound power level: L
WA
= 108 dB(A)
Uncertainty: K = 3 dB
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PEH 30 C3 - IAN 303564 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PEH 30 C3 - IAN 303564 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PEH 30 C3 - IAN 303564

Parkside PEH 30 C3 - IAN 303564 User Manual - German, Dutch - 29 pages

Parkside PEH 30 C3 - IAN 303564 User Manual - Danish, French, Polish - 87 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info