Manual Parkside PEBS 900 SE - IAN 37835 (page 28 of 44) (English, German, Portuguese, Spanish)

679125

Zoom out

Zoom in

1/44

29 GB/MT

General safety advice for electrical power tools

b) Do not use an electrical power tool if

its switch is defective. An electrical power

tool that can no longer be switched on and oﬀ

is dangerous and must be repaired.

c) Pull the mains plug from the socket

before you make any adjustments to

the device, change accessories or

when the device is put away. This pre-

caution is intended to prevent you from uninten-

tionally starting the device.

d) When not in use always ensure that

electrical power tools are kept out of

reach of children. Do not let anyone

use the device if he or she is not famil-

iar with it or has not read the

instructions and advice. Electrical power

tools are dangerous when they are used by

inexperienced people.

e) Look after the device carefully. Check

that moving parts are working prop-

erly and move freely. Check for any

parts that are broken or damaged

enough to detrimentally affect the

functioning of the device. Have dam-

aged parts repaired before you use

the device. Many accidents have their ori-

gins in poorly maintained electrical power

tools.

f) Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp

cutting edges are less likely to jam and are

easier to control.

g) Use the electrical power tool, accesso-

ries, inserted tools etc. in accordance

with these instructions and advice,

and the stipulations drawn up for this

particular type of device. In doing this,

take into account the working condi-

tions and the task in hand. The use of

electrical power tools for purposes other than

those intended can lead to dangerous situations.

Safety advice for

belt sanders

J DANGER OF FIRE FROM FLYING

SPARKS! Sanding metal creates ﬂying sparks.

For this reason, always make sure that nobody

is placed in any danger and that there are no

inﬂammable materials near the working area.

J When undertaking prolonged sanding of

wood, and in particular when working on ma-

terials that give rise to dusts that are hazardous

to health, the sander must be connected to a

suitable external dust extraction device.

J Ensure that there is adequate ventilation when

working on plastic, paint, varnish etc.

J The belt sander is designed for the dry sanding

of large surfaces of wood, plastic, metal and

plaster and painted surfaces. The device is to

be used for dry sanding only.

J Do not sand materials containing asbestos.

Asbestos is a known carcinogen.

WARNING!

POISONOUS DUSTS!

Sanding paints containing lead, some types of

wood and metal for example may give rise to

hazardous or poisonous dusts and represents a

risk to the health of the person operating the

device and to anyone near the work area.

Wear safety glasses and a dust

protection mask!

J Securely support the workpiece. Use clamps or

a vice to grip the workpiece ﬁrmly. This is much

safer than holding it with your hand.

J Never support yourself by placing your hands

near or in front of the device or the workpiece

surface. A slip can result in injury.

J If a dangerous situation arises, pull the mains

plug immediately out of the mains socket.

J Always work with the mains lead leading

away from the rear of the device.

J Avoid contact with the moving sanding belt.

J Do not work on moistened materials or damp

surfaces.

J Always switch on the device before placing it

against the workpiece. After sanding, lift the de-

vice from the workpiece before switching it oﬀ.

J When working always hold the device securely

with both hands (see Fig. D). Always keep

proper footing and balance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PEBS 900 SE - IAN 37835 in the language / languages: English, German, Portuguese, Spanish as an attachment in your email.

The manual is 3,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PEBS 900 SE - IAN 37835

Parkside PEBS 900 SE - IAN 37835 User Manual - Dutch, French, Italian - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PEBS 900 SE - IAN 37835 Manual

Product: