Manual Parkside PDWS 8 A1 - IAN 96956 (page 24 of 28) (English, German, Dutch)

595407

Zoom out

Zoom in

1/28

24 GB

… / … / … / Cleaning and Care / Information about warranty and service processing

General safety instructions for air tools

Protect hoses from kinks, constrictions, solvents

and sharp edges. Keep hoses away from heat,

oil and rotating parts.

Ensure that the hose clamps are always ﬁrmly

secured. Hose clamps that have been insuﬃ-

ciently tightened or damaged could allow air

to escape in an uncontrolled manner.

Replace damaged hoses immediately. A dam-

aged supply line may result in the air hose ﬂap-

ping about and may result in injuries.

If the mains power cable of the device is dam-

aged, it has to be replaced by the manufacturer

or its service department or a similarly qualiﬁed

person in order to avoid hazards.

Do not use the device when tired or under the

inﬂuence of drugs, alcohol or medications.

One moment of carelessness when using the

device may result in serious injuries.

Do not directly inhale the exhaust air. Keep

eyes away from exhaust air. Exhaust air from

the compressed air device may contain water,

oil, metal particles or contamination from inside

the compressor. This may result in injury to health.

BE CAREFUL WHEN YOU

PUT DOWN THE DEVICE! Always put down

the device so it does not come into contact with

the trigger. This could potentially result in acci-

dental activation of the device, which again

could result in hazards.

Only use suitable accessories. These may be

purchased from the manufacturer. Using non-

OEM accessories may result in hazards.

Only use ﬁltered and regulated compressed

air. Dust, caustic vapours and/or moisture may

damage the motor of an air tool.

The hose must be designed for pres-

sures of at least 8.6 bar or 125 PSI,

but at least 150 % of the maximum

pressure generated in the system.

The tool and supply line must be

equipped with a hose coupling to

completely remove pressure when

disconnecting the coupling hose.

DANGER! Avoid contact with live lines. This

device is not insulated against electric shock.

DANGER OF INJURY! High

working pressures can give rise to recoil forces

that under certain conditions can result in danger

from continuous loading.

If you are inexperienced in the use of this type

of device, you should seek out information or

training to learn how to handle it safely.

DANGER OF STAB

WOUNDS! Do not treat an injection as a sim-

ple cut. A high pressure jet may inject toxins into

the body and cause serious injuries. If the spray

is injected into the skin, seek medical help im-

mediately.

Do not modify this device in any way without

the manufacturer‘s approval.

Only use the device with the speciﬁed pressure

(2–9 bar).

Disconnect the tool from the air supply after

each use and when not in use.

Discontinue use if the tool leaks or is in need of

repair.

Never connect the tool to an air hose with

pressure exceeding 9 bar.

Keep your working area clean and well lit.

Untidy or poorly lit working areas can lead to

accidents. Doing so will allow you better con-

trol of the device, particularly under unforeseen

circumstances.

Only have the device repaired

by qualiﬁed specialist personnel using OEM

spare parts. This will ensure that your device

remains safe to use.

Keep children and other individuals away from

the device during use. Distractions can cause

you to lose control of the device.

Wear suitable clothing. Do not wear loose

clothing or jewellery. Keep your hair, clothing

and gloves clear of moving parts. Loose cloth-

ing, jewellery or long hair can become trapped

in moving parts.

Put down trigger and device in the event of un-

expected compressor failure.

If possible, use a condensate trap or drain the

hoses and pipes of condensate (water) regu-

larly before and during the use compressed air

devices (water).

ATTENTION! An undersized com-

pressed air system may minimise the

eﬃciency of your device.

96956_par_Druckluft Wasserstrahler PDWS 8 A1_Content_DE_NL.indd 24 24.04.14 08:20

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDWS 8 A1 - IAN 96956 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PDWS 8 A1 - IAN 96956

Parkside PDWS 8 A1 - IAN 96956 User Manual - French - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PDWS 8 A1 - IAN 96956 Manual

Product: