Manual Parkside PDT 40 C2 - IAN 96899 (page 24 of 28) (English, German, Dutch)

595417

Zoom out

Zoom in

1/28

24 GB

Preparing the product for use / OperationSafety of the fastener driving tool / Preparing the product for use

Use suitable personal protection equip-

ment, e.g. hearing and eye protection.

Wearing personal protective devices such as

dust mask, non-slip safety shoes, safety helmet

or hearing protectors, depending on the type

of fastener driving tool and its application, re-

duces the risk of injuries.

Additional safety information

for compressed air tackers

RISK OF INJURY! Never

exceed the maximum permissible operating

pressure of 8 bar. Use a pressure reducer to

adjust the operating pressure.

RISK OF INJURY! Never

use oxygen or other ﬂammable gases as ener-

gy source.

Keep your working area clean and

well lit. Untidy or poorly lit working areas

can lead to accidents.

Keep children and other individuals

away from the fastener driving tool

during use. Distractions can cause you to

lose control of the device.

Remain alert at all times, watch what

you are doing and always proceed with

caution when working with a fastener

driving tool. Do not use any fastener

driving tool if you are tired or under the

influence of drugs, alcohol or medica

tion.

One moment of carelessness when using the fas-

tener driving tool may result in serious injuries.

Avoid placing your body in an unnat-

ural position. Keep proper footing

and balance at all times. By doing this you

will be in a better position to control the fas-

tener driving tool in unforeseen circumstances.

Before any repair and maintenance work or

transport, remove the device from the com-

pressed air source.

RISK OF INJURY! Do not use the device on

scaﬀolds or ladders.

Never use hydrogen, oxygen, carbon dioxide

or other bottled gasses to power this tool as

doing so may result in an explosion and thus

may cause severe injuries.

RISK OF INJURY! Do not use the device if

the trigger lock

is damaged or has been

removed. Otherwise injuries may result.

When loosening the hose coupling, hold the

hose ﬁrmly in your hand to prevent injuries

caused by a rebounding hose.

Be absolutely certain to use a ¼” threaded

nipple and a quick-release coupling for the

compressed air connection.

Never place your hands near the mouth when

the device is ready to operate. Otherwise inju-

ries may result.

Pay attention to damage. Check the de-

vice for damage before bringing it into use. If

the device exhibits defects, it must not be oper-

ated under any circumstances.

Do not use any pointed objects. Never

insert pointed and / or metal objects into the

inside of the device.

Original accessories / tools

Use only the accessories and attachment

detailed in the operating instructions.

The use of fasteners or other accessories other

than those recommended in the operating in-

structions could lead to you suﬀering an injury.

Preparing the product for use

NOTE: always wear the protective goggles sup-

plied before putting the tool into operation. Remove

the protective ﬁlm from the protective goggles before

using for the ﬁrst time.

Connecting the compressed

air source

NOTE: The compressed air tacker must only be

operated with cleaned, oil-misted compressed air

and must not exceed the maximum operating pres-

sure of 8 bar. The compressor must be ﬁtted with a

pressure reducer in order to regulate the operating

pressure.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDT 40 C2 - IAN 96899 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PDT 40 C2 - IAN 96899

Parkside PDT 40 C2 - IAN 96899 User Manual - French - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PDT 40 C2 - IAN 96899 Manual

Product: