796077
7
Zoom out
Zoom in
Previous page
1/132
Next page
PDSSAP 20-Li B2
2 GBIE
CORDLESS IMPACT DRIVER 20V
PDSSAP 20-LI B2
Introduction
Congratulations on the purchase of your new tool.
You have chosen a high-quality product. The oper-
ating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass all associated documents on to any future
owner(s).
Intended use
This appliance is intended for screwing in and
unscrewing screws as well as for tightening and
loosening nuts. The appliance has clockwise/anti-
clockwise rotation, a 1/4" hexagon socket bit
holder and an LED working light. The light on this
appliance is intended to illuminate the immediate
work area of the appliance. The rotary impact
function of the appliance enables the power of the
motor to be converted into uniform rotary impacts.
The impact mechanism comes into effect during
tightening and loosening.
The appliance is designed for use by adults. Young
people under 16 years of age may only use the
appliance under supervision. The manufacturer
accepts no liability for damages caused by
improper use or incorrect operation of the appli-
ance.
Use this appliance only as described and for the
application areas specified. The appliance is not
intended for commercial use. Any other usage or
modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage attributable to misuse.
Features
1 Tool holder
1a Locking collar
2 Rotation direction switch/lock
3 Belt clip
3a Fixing screw
4 LED work light
5 Torque display
6 Torque preselection
7 ON/OFF switch/speed control
8 Battery pack*
9 Release button for the battery pack
0 High-speed charger*
q Battery display LED
w Battery charge level button
e Red charge control LED
r Green charge control LED
Package contents
1 cordless impact driver 20V
1 belt clip
1 carrying case
1 set of operating instructions
Technical specifications
Cordless Impact Driver 20V PDSSAP 20-Li B2
Rated voltage 20 V (DC)
Gears 4-speed gearbox
Rated idle speed 1st gear n0 0–1900 rpm
2nd gear n0 0–2400 rpm
3rd gear n0 0–3050 rpm
4rd gear n0 0–3600 rpm
Impact frequency 1st gear 0–1200/min
2nd gear 0–2400/min
3rd gear 0–3800/min
4rd gear 0–4300/min
Torque levels 1st level 120 Nm
2nd level 150 Nm
3rd level 190 Nm
4rd level 226 Nm
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PDSSAP 20-Li B2 - IAN 364886 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDSSAP 20-Li B2 - IAN 364886 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info