Manual Parkside PDSSAP 20-Li A1 - IAN 329780 (page 23 of 105) (English, German, Dutch, French, Polish)

796064

Zoom out

Zoom in

1/105

PDSSAP 20-Li A1 GB│IE │ 19 ■

4. Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the switch does

not turn it on and oﬀ. Any power tool that

cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power source

and/or remove the battery pack, if detach-

able, from the power tool before making any

adjustments, changing accessories, or storing

power tools. Such preventive safety measures

reduce the risk of starting the power tool acci-

dentally.

d) Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition

that may aﬀect the power tool’s operation. If

damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and acces-

sory tools etc. in accordance with these

instructions, taking into account the working

conditions and the work to be performed.

Using power tools for operations diﬀerent from

those intended can result in hazardous situa-

tions.

h) Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow for

safe handling and control of the tool in unex-

pected situations.

5. Use and handling of the cordless

electrical power tool

a) Charge a rechargeable battery using only

the charger recommended by the manufac-

turer. Chargers are often designed for a partic-

ular type of rechargeable battery unit. There is

a risk of ﬁre if other types of rechargeable

battery units are used.

b) Only the rechargeable battery units supplied

are to be used with an electrical power tool.

The use of other rechargeable battery units may

lead to the danger of injury or ﬁre.

c) When they are not being used, store

rechargeable battery units away from paper-

clips, coins, keys, nails, screws or other small

metal objects that could cause the contacts to

be bridged. Short-circuiting the contacts of a

rechargeable battery unit may result in heat

damage or ﬁre.

d) Fluids may leak out of rechargeable battery

units if they are misused. If this happens,

avoid contact with the ﬂuid. If contact occurs,

ﬂush the aﬀected area with water. Seek addi-

tional medical help if any of the ﬂuid gets into

your eyes. Escaping battery ﬂuid may cause

skin irritation or burns.

e) Do not use a damaged or modiﬁed battery.

Damaged or modiﬁed batteries may behave

unexpectedly and cause ﬁres, explosions or

pose a risk of injury.

f) Do not expose a battery to ﬁre or excessively

high temperatures. Fire or temperatures in

excess of 130°C (265°F) can cause an explo-

sion.

g) Follow all instructions regarding charging

and never charge the battery or the cordless

tool outside of the temperature range given in

the operating instructions. Incorrect charging

or charging outside of the permissible tempera-

ture range can destroy the battery and increase

the risk of ﬁre.

IB_329780_PDSSAP20-LiA1_LB8.indb 19 12.08.20 10:57

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PDSSAP 20-Li A1 - IAN 329780 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1.1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PDSSAP 20-Li A1 - IAN 329780 Manual

Product: